Paradyne 3800 manual Dial Access Security Messages, Indicates

Models: 3800

1 213
Download 213 pages 48.38 Kb
Page 43
Image 43
Dial Access Security Messages

COMSPHERE 3800 Series Modems

Messages listed in Table 4-6 are dial access security messages that can occur when the optional security feature is installed.

The Top-Level menu’s main branches appear on the LCD in the order of Call Setup, Talk / Data, Status, Test, Configure, Control, Security, and Remote. These branches are described in the following chapters.

 

Table 4-6

 

Dial Access Security Messages

 

 

Dial Access

Indicates

Security

Messages

 

 

 

Get VF PsWd

The answering modem is waiting for the originating caller to transmit a VF password.

 

 

Get DTE PsWd

The answering modem is waiting to receive a valid DTE password from the remote DTE.

 

 

VF PsWd Timeout

The modem did not finish answering a call (disconnected) because the allowed time limit was

 

exceeded before the modem received a VF password from the originating dialer.

 

 

Unknown DTEpswd

The modem did not finish answering a call (disconnected) because the DTE passwords received

 

from the remote DTE were invalid.

 

 

No Orig PsWd

The modem did not attempt to establish a call as requested because the AT dial command did not

 

contain an originate access password.

 

 

Unknown VF PsWd

The modem did not finish answering a call (disconnected) because the modem received an

 

invalid VF password.

 

 

DTEpswd Timeout

The modem did not finish answering a call (disconnected) because the allowed time limit was

 

exceeded before the modem received a DTE password from the remote DTE.

 

 

Inval Orig PsWd

The modem did not attempt to establish the call as requested because the originate password in

 

the AT dial command was not valid.

 

 

DTR Dial Blocked

Appears if DTR dialing is used and Answer Access or Originate Access security is enabled. DTR

 

dialing is not permitted when security is enabled.

 

 

SecurityBlocked

Appears only when the modem is in base mode (a mode that occurs during a firmware download)

 

and Answer Access Security is enabled. In this case, the access verification capabilities are not

 

available and the modem does not pass data to the DTE under any circumstances.

 

 

4-12

September 1998

3810-A2-GB30-30

Page 43
Image 43
Paradyne 3800 manual Dial Access Security Messages, Indicates