Paradyne 3800 manual Disconnect, Answer, AT Command Equivalent, Call Setup Branch

Call Setup Branch

Disconnect

Disconnect allows the modem to go on-hook (hang up). Use this function when you want to disconnect an established call on a dial line.

NOTE

When the Model 3820 is configured for leased-line operation, this function is not available and is not displayed on the LCD.

To access Disconnect from the Call Setup branch, make the following selection:

Call Setup:		>
Dial	Disconnect
F1	F2	F3

Select Disconnect.

Disconnect

Command Complete

F1 F2 F3

The modem goes on-hook (hangs up) and the call is disconnected. This includes any calls being used for dial backup of leased lines. The Command Complete status message is displayed.

To exit this function and remain in the Call Setup

branch, press the key. To exit and return to the

Top-Level menu, press the key.

AT Command Equivalent

The AT command equivalent for Disconnect is H or H0.

Answer

Answer allows the modem to go off-hook, generate an answer tone, and begin the handshaking process with the calling modem. Use the Answer function when the Auto-Answer Ring Count configuration option is disabled. (See the Line Dialer section in Chapter 9.)

NOTE

When the Model 3820 is configured for leased-line operation, this function is not available and is not displayed on the LCD.

To access Answer from the Call Setup branch, make the following selections:

Call Setup:

Answer

F1 F2 F3

Press the key until Answer is displayed. Select Answer.

Answer

Command Complete

F1 F2 F3

The modem goes off-hook and attempts to establish a connection in Answer mode. The Command Complete status message appears on the LCD.

To exit this function and remain in the Call Setup

branch, press the key. To exit and return to the

Top-Level menu, press the key.

AT Command Equivalent

The AT command equivalent for Answer is A.

3810-A2-GB30-30 September 1998 5-3