Paradyne 3800 Model 3810 Dial-Line Connection, Model 3810 4-Wire/2-Wire Leased-Line Connection

COMSPHERE 3800 Series Modems

Model 3810 Dial-Line

Connection

For the Model 3810, use the following procedures to connect the modem to the dial network interface:

1.Insert the 6-position, 4-conductor modular plug into the jack labeled DIAL / LEASED (3820). See Figure 2-2.

2.Insert the other end of the modular cord into the dial network interface.

Model 3810 4-Wire/2-Wire Leased-Line Connection

Use the following procedures to connect a Model 3810 to the leased-line network interface:

1.Insert the 8-position, 8-conductor modular plug into the jack labeled PHONE / LEASED (3810). See Figure 2-2.

2.Insert the other end of the modular cord into the leased-line network interface.

3.If the Model 3810 has a dial backup line, follow the steps listed in Model 3810 Dial-Line Connection section.

		PHONE	DIAL	NMS
				DTE
0	1
	PWR	LEASED	LEASED
		(3810)	(3820)
				98-13070-02

6-POSITION,

4-CONDUCTOR PLUG FOR TELEPHONE SET

8-POSITION,

8-CONDUCTOR PLUG FOR LEASED LINE NETWORK OPERATION (CONNECTS WITH JM8 TYPE JACK)

6-POSITION, 4-CONDUCTOR PLUG FOR PERMISSIVE DIAL NETWORK OPERATION (CONNECTS WITH RJ11C TYPE JACK)

Figure 2-2. Model 3810 Rear Panel

2-4 September 1998 3810-A2-GB30-30