Manuals / Paradyne / Computer Equipment / Network Card

Paradyne manual Online Control ExitRem, 1. Top-Level Menu of a Remote 3800 Series Modem

Models: 3800

1 213

Download 213 pages 48.38 Kb

Page 124

Online : 19.2

Remote Branch

Online : 19.2

Control ExitRem

F1 F2 F3

If the remote modem accepts the password and the entry is successful, the Top-Level menu of the remote modem (Figure 11-1) appears on the local modem’s LCD. An appears in the upper right-hand corner indicating that what is displayed on your LCD is actually the Top-Level menu of the remote 3800 Series modem.

The Top-Level menu of the remote 3800 Series modem is similar to the local 3800 Series modem with the following exceptions:

•The Talk/Data branch does not appear.

•Change Directory is the only function available under the Call Setup branch.

•Self and Local Analog Loop do not appear under the Test branch when using the secondary channel. When using the primary channel, the Test branch does not appear.

•Exit Remote replaces Remote on the local modem’s LCD.

To return to local modem operation, select ExitRem. Any changes made to configuration options in the remote modem are saved.

The following conditions can cause Remote branch access to fail:

•The local modem is not able to communicate with the remote modem because of a poor dial network or leased-line connection, or the remote modem is not a 3800 Series modem. If this is the case, the status message No Response appears on the LCD.

•If a connection is established but the remote modem’s Access from Remote configuration option is disabled, then the status message Access Disabled appears on the LCD.

•If a connection is established but the wrong password is stored, the status message Password Invalid appears on the LCD. This configuration option must be enabled by the remote user.

Figure 11-1. Top-Level Menu of a Remote 3800 Series Modem

3810-A2-GB30-30

September 1998

11-3

Image 124

Paradyne manual Online Control ExitRem, 1. Top-Level Menu of a Remote 3800 Series Modem

Contents

USER’S GUIDE COMSPHERE 3800 SERIES MODEMS MODELS 3810, 3811, ANDDocument No. 3810-A2-GB30-30 COMSPHERE 3800 SERIES MODEMS MODELS 3810, 3811, AND USER’S GUIDEDocument No. 3810-A2-GB30-30 SeptemberCOMSPHERE 3800 Series Modems Models 3810, 3811, and COPYRIGHT E 1998 Paradyne Corporation. All rights reservedWarranty, Sales, and Service Information Document FeedbackImportant Safety Instructions The following warning applies to all Model 3811 modems NoticesCOMSPHERE 3800 Series Modems Government Requirements and Equipment Return Notice to Users of the Public Switched Telephone NetworkUnited States Notice to Users of the Canadian Public Switched Telephone Network CanadaPage September COMSPHERE 3800 Series Modems3810-A2-GB30-30 Table of Contents 2. Model 3810 and 3820 Installation3. Model 3811 Installation PrefaceCall Setup Branch Configure BranchDCP Operation 6. Talk/Data Branch14. AT Command Set and S-Registers 12. Security13. Fax Operation AppendicesList of Figures PageTables List of TablesPage September COMSPHERE 3800 Series Modems3810-A2-GB30-30 How to Use This Manual PrefaceObjectives and Reader Assumptions Chapter 7 - Status Chapter 8 - TestCarrier, Installation Manual Installation InstructionsSelect Service & Support → Technical Manuals Related DocumentsIntroduction OverviewOptions FeaturesCOMSPHERE 3800 Series Models Model 3810 and 3820 Installation Overview3800 Series Modem Package Figure 2-1. Model 3810 andCustomer-Supplied Equipment Model 3810 or Model 3820 Modem Installation6700 Series Network Management System User’s Guide Model 3810 Dial-Line Connection Model 3810 4-Wire/2-Wire Leased-Line ConnectionFigure 2-2. Model 3810 Rear Panel Model 3820 Dial-Line Connection Model 3820 2-Wire Leased-Line ConnectionFigure 2-3. Model 3820 Rear Panel DTE Connection AC Power Transformer Connection Modem Power-UpPower On Selftst Passed Model 3810 and Model 3820 Telephone ConnectionRemoving and Replacing Model 3810 and Model 3820 Modems Model 3811 Installation OverviewModel 3811 Installation Figure 3-1. ModelFigure 3-2. Installing a Model 3811 Modem Model 3811 InstallationRemoving and Replacing Model 3811 Modems Figure 3-3. Circuit Pack LockDiagnostic Control Panels Models 3810 and Diagnostic Control PanelsDCP Operation OverviewFigure 4-1. Model 3810 DCP Figure 4-2. Model 3820 DCPCOMSPHERE 3800 Series Modems SeptemberModel 3811 Faceplate and Shared Diagnostic Control Panel Figure 4-3. Optional SDCP, Model 3811 Faceplate, and Optional SDUStatus Indicators Model 3810 and Model 3811 DCP LEDsLabel ColorModel 3820 DCP LEDs SDCP LEDsLabel ColorDiagnostic Control Panel Operation Hidden Choice IndicatorsRight Scroll Indicator Left/Right Scroll IndicatorMenu Structure and KeysSelect Key Model 3811 only Call SetupAlarm Status Setup MessagesTop-Level Menu Status and Operational Messages 1 of2 of MessagesCall Disconnect Top-Level Menu StatusDial Backup AT CommandReset Message 3 ofCommon Operational Messages CommonIndicates MessagesDial Access Security Messages Dial AccessSecurity IndicatesUsing the Diagnostic Control Panel DCP Selecting Factory Configuration OptionsUsing AT Commands TYPE AT TYPE AT&Fy&WnDiagnostic Control Panel Security Access Frnt Panl Acces Grant DenyCOMSPHERE 3800 Series Modems September4-16 3810-A2-GB30-30CallSetup Call Setup BranchOverview AT Command Equivalent Call Setup BranchDial Disconnect AnswerAT Command Equivalent AT Command EquivalentFigure 5-1. Dial Backup Dial Standby/Return to DialChange Directory AT Command Equivalent01 9W5556789 z Valid Dial Command ModifiersAT Command Equivalent Talk/Data Branch Talk/Data BranchOverview Manual Dialing when the Remote Modem Is Configured for Manual Answer Manual Dialing when the Remote Modem Is Configured for Auto-AnswerPlacing Modems into Talk Mode Once Modems Are Online Overview Status BranchOverview Status Branch VF Identity DTE RS366A Options Record Excellent, Good, Fair, Poor, or Status BranchAT Command Equivalent Identity AT Command EquivalentSer # Mod #RS366A Status Identity DTELSD DTR DSR Tst RS366ARecord OptionsAT Command Equivalent September COMSPHERE 3800 Series Modems3810-A2-GB30-30 Overview Test BranchTest Test Branch AbortSelf AT Command EquivalentFigure 8-1. Local Analog Loopback Loc Analog LoopAT Command Equivalent Figure 8-2. Remote Digital Loopback Rem Digital LoopAT Command Equivalent Figure 8-3. Local Digital Loopback Loc Digital LoopAT Command Equivalent Figure 8-4. Pattern Test and Local Analog Loopback Test PatternFigure 8-5. Pattern Test and Remote Digital Loopback Test Figure 8-6. End-to-End Pattern Test AT Command EquivalentSeptember COMSPHERE 3800 Series Modems3810-A2-GB30-30 Configure Branch OverviewFigure 9-1. DCP Configuration Process COMSPHERE 3800 Series ModemsSeptember Active Operating Active Saved Customer 1 Customer 2 FactoryFigure 9-2. AT Command Configuration Process Configure BranchConfigure Branch ConfigureEditing and Saving a Configuration Option Summary Configuration Tables DTE Interface1 of DTE Interface Configuration Options Async/Sync Mode Async Nxt Async SyncAsync DTE Rate #Data Bits Nxt 8 7 9DirectMde 6DirectMdeParity Bit None Nxt None Even Odd Mark Space 2 of DTE Interface Configuration Options#Stop Bits Nxt 1 DTR Action Ignore 3 of DTE Interface Configuration OptionsDSR Control ForcedOn DSR Control cont’d 4 of DTE Interface Configuration OptionsRTS Action Ignore Nxt Ignore StndrdRS232 SimCntlCar CntlCar RTS/CTS Delay 0 msec Nxt 0msec 10msec 50msec 150msec 600msec 5 of DTE Interface Configuration OptionsCTS Control ForcedOn Nxt ForcedOn StndrdRS232 WinkWhenDisc FollowsDTR 6 of DTE Interface Configuration Options LSD Control StndrdRS232BridgeRetrain TX Clock Source Internal Nxt Internal External RXCLoopCT111Rate Cntl Disable Nxt Disable Fallback1 Fallback2 7 of DTE Interface Configuration OptionsDTE Rate=VF Disable End Disable Enable 1 of DTE Dialer Configuration Options DTE Dialer2 of DTE Dialer Configuration Options BreakForceEscap Disable Nxt Disable EnableCommandCharEcho Enable Nxt Enable Disable AT Escape Char 043 ASCI Nxt 043 ASCI3 of DTE Dialer Configuration Options Result Codes Enable Nxt Enable Disable EnableInOrigExtendResltCode Enable Nxt Enable Disable Add/EC Add/V42,MNP UseDTERate4 of DTE Dialer Configuration Options AT Cmnd Mode Normal Nxt Normal NoERROR NoStrapOrERRResultCode Form Words Nxt Words Numbers 1 Numbers V25bis Coding ASCII Nxt ASCII EBCDICDTR Cont Repeat Disable End Disable Enable 5 of DTE Dialer Configuration OptionsV.25b NewLineChr CR+LF Nxt CR+LF CR LF 1 of Line Dialer Configuration Options Line Dialer2 of Line Dialer Configuration Options BusyTone Detect Enable Nxt Enable DisableBlind Dial Paus 2sec Nxt 2sec 4sec 6sec 8sec 10sec 20sec ‘‘,” Pause Time 2sec Nxt 2sec 4sec 6sec 8sec 10sec 20sec3 of Line Dialer Configuration Options Fast Disconnect Disable Nxt Disable EnableLine Crnt Disc Enab8msec Nxt Enab8msec Enab90msec Disable Long Space Disc Enable Nxt Enable Disable4 of Line Dialer Configuration Options No Carrier Disc 2sec Nxt 2sec 5sec Disable 10sec 20secNo Data Disc Disable Nxt Disable 10min 30min 60min NoDataDiscTrig Nxt TXD or RXD TXD and RXD TXD Only RXD Only5 of Line Dialer Configuration Options Auto Make Busy Disable Nxt Disable EnableMakeBusyViaDTR Disable Nxt Disable Enable DTR Auto Redial1 of Dial Line Configuration Options Dial Line2 of Dial Line Configuration Options V32bis Autorate Enable Nxt Enable Disable StartAt48 StartAt96V22b Guard Tone Disable Nxt Disable 550Hz 1800Hz Dial TX Level PermissvFallFwdDelay Disable End Disable 5mins 15mins 1hour 3 of Dial Line Configuration OptionsV32bis Train Long Nxt Long Short 1 of Leased Line Configuration Options Leased Line2 of Leased Line Configuration Options V32bis Autorate Enable Nxt Enable Disable2W SQ Retrain Disable Nxt Disable 1 2 3 4 1800HzTrainTone Disable Nxt Disable Enable3 of Leased Line Configuration Options BdLn Auto Orig Disable Nxt Disable Enable FastBackup 2min 5min 10minRate Auto Orig Disable 4 of Leased Line Configuration OptionsAuto Redial 5 of Leased Line Configuration Options AutoDialStandby DisableV29 TrainOnData Disable Nxt Disable Enable FallFwdDelay Disable End Disable 5mins 15mins 1hour1 of V.42/MNP/Buffer Configuration Options V.42/MNP/Buffer2 of V.42/MNP/Buffer Configuration Options Err Contrl Mode contV42bis Compress Enable Nxt Enable Disable MNP5 Compress Enable Nxt Enable Disable3 of V.42/MNP/Buffer Configuration Options EC Negotiat Bfr Disable Nxt Disable Enable Disab&SwitchFlw Cntl of DTE CTStoDTE Nxt CTStoDTE Disable XON/XOFF EC Fallbck Char 013 ASCI Nxt 013 ASCI4 of V.42/MNP/Buffer Configuration Options Flw Cntl of Mdm Disable Nxt Disable XON/XOFF RTStoMdmXON/XOFF Psthru Disable Nxt Disable Enable Mdm/Mdm FlowCtl Disable Nxt Disable Enable5 of V.42/MNP/Buffer Configuration Options TXBuffDiscDelay 10sec Nxt 10sec 60sec DisableBreak Buffr Ctl KeepData Nxt KeepData DiscardData Send Break Cntl DataFirst Nxt DataFirst BreakFirst6 of V.42/MNP/Buffer Configuration Options RxBuffDiscDelay Disable Nxt 0sec 60sec DisableCellularEnhance End Disable Enable Max Frame Size Nxt 256 192 128 64 321 of Test Configuration Options TestsV54 Address Disable Nxt Disable Address Values 2 of Test Configuration OptionsV54 Device Type Peripheral End Peripheral Intermediate 1 of Miscellaneous Configuration Options Misc2 of Miscellaneous Configuration Options Speaker Volume Medium Nxt Medium Low HighAccess frm Remt Enable Nxt Enable Disable Dir#1Callback Disable Nxt Disable Enable3 of Miscellaneous Configuration Options Nxt CallCnct&Prg Disable CallCnctOnly CallProgOnlyNMS DTR Alarm Disable Nxt Disable Enable NetMngmtAddress 256 NxtCellulrRJ11Adpt Disable End Disable Enable 4 of Miscellaneous Configuration OptionsNetworkPosition Tributary Nxt Tributary Control Security Configuration Options 1 of Security Configuration Options2 of Security Configuration Options GetUserID Disable Nxt Disable EnableDTEPWBkSpChar 008 Nxt NMSReporting NxtControl Branch Control BranchIdle Control Remote OverviewReset SpeakerAT Command Equivalent AT Command EquivalentService Line/Disconnect Service Line Control Reset MakeBusyMake Busy Command Complete Control ServiceLineDownLoad Code Clone To Remote14,400 bps = 10 minutes 9600 bps = 15 minutes AT Command EquivalentWarning Download ReprogramRemote RemClone Status Establish RemoteRemClone Status Initializing RemClone Status Bank 1 xxxx/yyyyTo Local via DTE Automatic Firmware DownloadDownload Failure Overview Remote BranchRemote Remote Branch Online Control ExitRem Figure 11-1. Top-Level Menu of a Remote 3800 Series ModemCOMSPHERE 3800 Series Modems September11-4 3810-A2-GB30-30Security OverviewOriginate Access Security Answer Access SecurityVF-Side Passwords PRESS EnterCombination of VF-Side and DTE-Side Passwords DTE-Side PasswordsTYPE abc123 PRESS Enter Security Branch SecuritySet Access Ctrl Administrative PasswordAccess Ctrl EditPasswdTableSelect Index Ent Access CtrlEdit Password Table Group Options PsWdType Nxt Cleared DTEEntry VFEntry VFplusDTEEdit PsWd Nxt yyyyyyyy or zzzzzz Save Edit? Edit Save Yes NoSet Answer Sec Set Answer Security Group OptionsSet Orig Sec Set Originate Security Group OptionsSet Admin PsWd Reset SecurityAnswer Access Password VF-Side and DTE-Side Entry Techniques Security Password Entry TechniquesPRESS Enter Originate Access Password Using VF-Side PasswordsVF Password Only PasswordSecurity Database Table Using DTE-Side Passwords DTE Password OnlySecurity Database Table Using Both VF-Side and DTE-Side Passwords VF and DTE PasswordsSecurity Database Table Using Paired VF-Side and DTE-Side Passwords VF and DTE PasswordsPassword IndexFax Operation Fax OperationOverview The DCP is disabled during fax operation AT Command Set and S-Registers14 Switching Between Data Mode and Online Command ModeOperating Modes Escape Sequence and Escape Guard TimeAT Command List Command GuidelinesTYPE ATO PRESS Enter AT Command Format 3800 Series AT CommandsCommand TYPE3800 Series AT Commands CommandCommand Character Echo Hook Switch Control3800 Series AT Commands Command3 of Description4 of 3800 Series AT Commands Front PanelCommand Configuration Options5 of 3800 Series AT CommandsCommand Reset and Load Active6 of 3800 Series AT Commands CommandSelect Factory Default Configuration Options Command Value7 of 3800 Series AT CommandsCommand Leased Mode8 of 3800 Series AT Commands CommandAsync/Sync Mode and DTE Dialer Type Description9 of 3800 Series AT Commands CommandView Configuration Options Description10 of 3800 Series AT CommandsCommand Error Control Negotiate Buffer11 of 3800 Series AT Commands CommandNo Data Disconnect Timer Error Control Fallback Character12 of 3800 Series AT CommandsCommand DescriptionS-Register List S-Register FormatTYPE ATSn? TYPE ATSn=r2 of 3800 Series S-Registers No Answer TimeoutS-Register Description3 of 3800 Series S-Registers Test TimeoutRTS-to-CTS Delay S-Register4 of 3800 Series S-Registers S-RegisterDescription Front Panel Branch5 of 3800 Series S-Registers Receive Buffer Disconnect DelayS-Register Description6 of 3800 Series S-Registers S-RegisterDescription Front Panel Branch7 of 3800 Series S-Registers Transmit Buffer Disconnect DelayS-Register Description8 of 3800 Series S-Registers Access From RemoteRemote Access Password Remote Access Password9 of 3800 Series S-Registers S-RegisterDescription Front Panel Branch10 of 3800 Series S-Registers DTR Alarm ReportingNo Data Disconnect Trigger Signal S-Register11 of 3800 Series S-Registers AT Command ModeStraps When Disconnected S-Register12 of 3800 Series S-Registers S-RegisterDescription Front Panel BranchMenu Tree A OverviewCOMSPHERE 3800 Series Modems 2400V22bis1200V22 1200212AMenu Tree V42/MNPorBfrV42/MNPorDsc MNP or BuffrExitRem appears instead of Remote when using Remote Mode Admin Password?SetAnswerSec SetAdminPsWd ResetResult Codes B Table B-1 1 of Result CodesNumbers WordTable B-1 2 of Result Codes NumbersNumbers WordTroubleshooting C SymptomTable C-1 Modem HealthTable C-2 Modem - DTE ConnectionModem - VF Connection SymptomSymptom 2 ofModem - VF Connection ActionDial Backup Operation Table C-4Online Operation Table C-5Technical Specifications D Technical SpecificationsTable D-1 1 of Technical Specifications for 3800 Series Modems SpecificationsTable D-1 2 of Technical Specifications for 3800 Series Modems SpecificationsAC POWER REQUIREMENTS POWER CONSUMPTIONTable D-1 3 of Technical Specifications for 3800 Series Modems SpecificationsDIMENSIONS DescriptionTable D-1 4 of Technical Specifications for 3800 Series Modems SpecificationsERROR CONTROL DescriptionVF Connector Pin Assignments 1. 2- wire operations 2. 4-wire operations w/o TEK leads3. 4-wire operations with TEK leads Figure E-1. Wiring Diagram - 8-Position to 6-Position Crossover CableTable E-1 VF Connector Pin Assignments Models 3810 and 3810 Dial Connector3820 Dial/Leased Connector Connector J6Signal EIA-232-D Pin AssignmentsTable E-3 EIA-232-D Pin Assignments RS-232Signal Source EIA RS-366-A Pin AssignmentsTable E-4 EIA RS-366-A Pin Assignments RS-366-AITU-T V.25bis Dialing Commands F and Response Call Request CommandsCall Request with Number Provided CRN OverviewCall Answer Commands Call Connecting CNXWhere xx is Call ResponseCommand Response Program Normal PRNRequest List of Stored Numbers RLN List Stored Number Response LSNTable F-1 V.25bis Commands V.25bis CommandAT Command Result Code Equivalent EquivalentDefault Configuration Options G Table G-1 1 of Factory Default Configuration OptionsConfiguration Option Answer/Originate ModeTable G-1 2 of Factory Default Configuration Options Async Dial and UNIX Dial Default SettingsSync Dial Default Settings Sync Leased Answer/Originate Mode Default SettingsTable G-1 3 of Factory Default Configuration Options Configuration OptionAsync Dial and UNIX Dial Default Settings Sync Dial Default SettingsTable G-1 4 of Factory Default Configuration Options Configuration OptionAsync Dial and UNIX Dial Default Settings Sync Dial Default SettingsFeature/Part Number Equipment List HEquipment 3810-A1-001September COMSPHERE 3800 Series Modems3810-A2-GB30-30 Glossary enabled Glossary Glossary-3demodulation Erasable programmable read-only memory ITU-T ITU-T V.22bis ITU-T V.27ter ITU-T ITU-T ITU-T V.32bis ITU-T ITU-T V.42bis ITU-T JM8 keypad LCD leased line LEDlocal analog loopback long space disconnect loopback test LSD menu treeoff-hook on-hook Originate mode parity PBX permissive interface power-up self-test product code programmable interface protocol PSTNMNP modem modulation network network address NIM NMS physical addresspulse dialing Sync Dial COMSPHERE 3800 Series Modems Glossary-10September 3810-A2-GB30-30Index NumbersPage Page Page Page Page 00282600 Set Admin PsWdSeepage 3810-A2-GB30-30 3810-A2-GB30-30