Paradyne 3800 manual Call Setup Branch, Dial, AT Command Equivalent

COMSPHERE 3800 Series Modems

Call Setup Branch

In the following descriptions, the shaded key indicates what key to press to perform the described operation.

To access the Call Setup branch from the Top-Level menu, select Call_Setup:

Idle: 19.2		>
Call_Setup
F1	F2	F3

Dial

Dial allows you to dial any telephone number stored in directory locations 1–10. Any telephone number dialed using the DCP must already exist in a directory location. Refer to Change Directory for information on storing telephone numbers in directory locations.

To access Dial from the Call Setup branch, make the following selection:

Call Setup:		>
Dial	Disconnect
F1	F2	F3

Select Dial to display the first directory telephone number.

Dial Directory:

Nxt 01:5551234

F1 F2 F3

To view other directory locations, select Nxt.

Dial Directory: 01

Dialing

F1 F2 F3

Once the directory location you want appears on the LCD, press the F2 or F3 key to dial the number.

If the connection is successful, the modem is online

and one of the Normal Operation status messages appears on the LCD. If the connection is not successful, the LCD displays one of the Call Failure status messages. (See Table 4-4 in Chapter 4.)

AT Command Equivalent

The AT command equivalent for Dial is DS=n, where n is directory location 1–10.

5-2 September 1998 3810-A2-GB30-30