Manuals / Paradyne / Computer Equipment / Network Card

Paradyne 3800 3 of, Dial Backup, Firmware, Download Result, AT Command, Reset Message, Indicates

Models: 3800

1 213

Download 213 pages 48.38 Kb

Page 41

(3 of 3)

COMSPHERE 3800 Series Modems

		Table 4-4
		(3 of 3)
		Top-Level Menu Status

	Dial Backup	Indicates
	Messages	Indicates
	Messages

	Dial Standby	The modem is operating in Dial Standby mode.

	DialBckUp:MR*	The modem is operating in a Dial Backup mode at the displayed data rate and is configured for
		Direct mode.

	Backup:MR* EC**	The modem is operating in Dial Backup mode and is configured for error control and data
		compression on leased lines.

	Stndby:MR* EC**	The modem is operating in Dial Standby mode and is configured for error control and data
		compression on leased lines.

	Firmware	Indicates
	Download Result	Indicates
	Messages

	DownldOnly Mode	Indicates that a local download of firmware or a remote cloning of firmware has failed. The
		modem is currently in a Download Only mode in which only another download attempt is possible.

	Frmware Upgrade	Indicates that a local download of firmware or a remote cloning of firmware was successful.

	RemClone Failed	Displays on the local modem’s LCD and indicates that a remote cloning of firmware has failed.

	Remote Clone OK	Displays on the local modem’s LCD and indicates that a remote cloning of firmware was
		successful.

	AT Command	Indicates
	Reset Message	Indicates
	Reset Message

	Reset by AT	The modem has performed a reset in response to an ATZ command.
	command

* MR. Modem Rate indicates the data rate the modem is using. One of the following values appears: 300, 1200, 2400, 4800, 7200, 9600, 12K (12,000), 14.4 (14,400), 16.8 (16,800), or 19.2 (19,200) bps.

** EC. Error Control indicates the modem is online and using V.42 or MNP error control. One of the following values appears after the modem rates listed above: MNP2, MNP3, MNP4, MNP5, V42, V42b, or NoEC. (NoEC indicates the modem is connected in Buffer mode rather than error control. If an EC value does not appear, then the modem is in Direct mode.)

4-10

September 1998

3810-A2-GB30-30

Image 41

Paradyne 3800 3 of, Dial Backup, Firmware, Download Result, AT Command, Reset Message, Top-Level Menu Status, Indicates

Contents

Document No. 3810-A2-GB30-30 COMSPHERE 3800 SERIES MODEMS MODELS 3810, 3811, ANDUSER’S GUIDE USER’S GUIDE COMSPHERE 3800 SERIES MODEMS MODELS 3810, 3811, ANDDocument No. 3810-A2-GB30-30 SeptemberCOPYRIGHT E 1998 Paradyne Corporation. All rights reserved COMSPHERE 3800 Series Modems Models 3810, 3811, andWarranty, Sales, and Service Information Document FeedbackImportant Safety Instructions COMSPHERE 3800 Series Modems NoticesThe following warning applies to all Model 3811 modems United States Notice to Users of the Public Switched Telephone NetworkGovernment Requirements and Equipment Return Canada Notice to Users of the Canadian Public Switched Telephone NetworkPage 3810-A2-GB30-30 COMSPHERE 3800 Series ModemsSeptember 2. Model 3810 and 3820 Installation Table of Contents3. Model 3811 Installation PrefaceConfigure Branch Call Setup BranchDCP Operation 6. Talk/Data Branch12. Security 14. AT Command Set and S-Registers13. Fax Operation AppendicesPage List of FiguresPage List of TablesTables 3810-A2-GB30-30 COMSPHERE 3800 Series ModemsSeptember Preface How to Use This ManualObjectives and Reader Assumptions Chapter 7 - Status Chapter 8 - TestInstallation Instructions Carrier, Installation ManualSelect Service & Support → Technical Manuals Related DocumentsOverview IntroductionCOMSPHERE 3800 Series Models FeaturesOptions Overview Model 3810 and 3820 InstallationFigure 2-1. Model 3810 and 3800 Series Modem Package6700 Series Network Management System User’s Guide Model 3810 or Model 3820 Modem InstallationCustomer-Supplied Equipment Figure 2-2. Model 3810 Rear Panel Model 3810 4-Wire/2-Wire Leased-Line ConnectionModel 3810 Dial-Line Connection Figure 2-3. Model 3820 Rear Panel Model 3820 2-Wire Leased-Line ConnectionModel 3820 Dial-Line Connection DTE Connection Modem Power-Up AC Power Transformer ConnectionPower On Selftst Passed Model 3810 and Model 3820 Telephone ConnectionRemoving and Replacing Model 3810 and Model 3820 Modems Overview Model 3811 InstallationFigure 3-1. Model Model 3811 InstallationModel 3811 Installation Figure 3-2. Installing a Model 3811 ModemFigure 3-3. Circuit Pack Lock Removing and Replacing Model 3811 ModemsModels 3810 and Diagnostic Control Panels Diagnostic Control PanelsDCP Operation OverviewFigure 4-2. Model 3820 DCP Figure 4-1. Model 3810 DCPCOMSPHERE 3800 Series Modems SeptemberFigure 4-3. Optional SDCP, Model 3811 Faceplate, and Optional SDU Model 3811 Faceplate and Shared Diagnostic Control PanelModel 3810 and Model 3811 DCP LEDs Status IndicatorsLabel ColorSDCP LEDs Model 3820 DCP LEDsLabel ColorHidden Choice Indicators Diagnostic Control Panel OperationRight Scroll Indicator Left/Right Scroll Indicatorand Keys Menu StructureSelect Key Model 3811 only Call SetupSetup Messages Alarm StatusTop-Level Menu Status and Operational Messages 1 ofMessages 2 ofCall Disconnect Top-Level Menu StatusAT Command Dial BackupReset Message 3 ofCommon Common Operational MessagesIndicates MessagesDial Access Dial Access Security MessagesSecurity IndicatesUsing AT Commands Selecting Factory Configuration OptionsUsing the Diagnostic Control Panel DCP TYPE AT&Fy&Wn TYPE ATFrnt Panl Acces Grant Deny Diagnostic Control Panel Security AccessSeptember COMSPHERE 3800 Series Modems4-16 3810-A2-GB30-30Overview Call Setup BranchCallSetup Dial Call Setup BranchAT Command Equivalent Answer DisconnectAT Command Equivalent AT Command EquivalentDial Standby/Return to Dial Figure 5-1. Dial BackupAT Command Equivalent Change DirectoryAT Command Equivalent Valid Dial Command Modifiers01 9W5556789 z Overview Talk/Data BranchTalk/Data Branch Placing Modems into Talk Mode Once Modems Are Online Manual Dialing when the Remote Modem Is Configured for Auto-AnswerManual Dialing when the Remote Modem Is Configured for Manual Answer Overview Status Branch VF Identity DTE RS366A Options Record Status BranchOverview AT Command Equivalent Status BranchExcellent, Good, Fair, Poor, or AT Command Equivalent IdentitySer # Mod #Status Identity DTE RS366ALSD DTR DSR Tst RS366AAT Command Equivalent OptionsRecord 3810-A2-GB30-30 COMSPHERE 3800 Series ModemsSeptember Test Test BranchOverview Abort Test BranchSelf AT Command EquivalentAT Command Equivalent Loc Analog LoopFigure 8-1. Local Analog Loopback AT Command Equivalent Rem Digital LoopFigure 8-2. Remote Digital Loopback AT Command Equivalent Loc Digital LoopFigure 8-3. Local Digital Loopback Figure 8-5. Pattern Test and Remote Digital Loopback Test PatternFigure 8-4. Pattern Test and Local Analog Loopback Test AT Command Equivalent Figure 8-6. End-to-End Pattern Test3810-A2-GB30-30 COMSPHERE 3800 Series ModemsSeptember Overview Configure BranchCOMSPHERE 3800 Series Modems Figure 9-1. DCP Configuration ProcessSeptember Active Operating Active Saved Customer 1 Customer 2 FactoryConfigure Branch Figure 9-2. AT Command Configuration ProcessConfigure Configure BranchEditing and Saving a Configuration Option Summary DTE Interface Configuration TablesAsync/Sync Mode Async Nxt Async Sync 1 of DTE Interface Configuration OptionsAsync DTE Rate #Data Bits Nxt 8 7 9DirectMde 6DirectMde#Stop Bits Nxt 1 2 of DTE Interface Configuration OptionsParity Bit None Nxt None Even Odd Mark Space DSR Control ForcedOn 3 of DTE Interface Configuration OptionsDTR Action Ignore RTS Action Ignore Nxt Ignore StndrdRS232 SimCntlCar CntlCar 4 of DTE Interface Configuration OptionsDSR Control cont’d CTS Control ForcedOn Nxt ForcedOn StndrdRS232 WinkWhenDisc FollowsDTR 5 of DTE Interface Configuration OptionsRTS/CTS Delay 0 msec Nxt 0msec 10msec 50msec 150msec 600msec LSD Control StndrdRS232 6 of DTE Interface Configuration OptionsBridgeRetrain TX Clock Source Internal Nxt Internal External RXCLoopDTE Rate=VF Disable End Disable Enable 7 of DTE Interface Configuration OptionsCT111Rate Cntl Disable Nxt Disable Fallback1 Fallback2 DTE Dialer 1 of DTE Dialer Configuration OptionsBreakForceEscap Disable Nxt Disable Enable 2 of DTE Dialer Configuration OptionsCommandCharEcho Enable Nxt Enable Disable AT Escape Char 043 ASCI Nxt 043 ASCIResult Codes Enable Nxt Enable Disable EnableInOrig 3 of DTE Dialer Configuration OptionsExtendResltCode Enable Nxt Enable Disable Add/EC Add/V42,MNP UseDTERateAT Cmnd Mode Normal Nxt Normal NoERROR NoStrapOrERR 4 of DTE Dialer Configuration OptionsResultCode Form Words Nxt Words Numbers 1 Numbers V25bis Coding ASCII Nxt ASCII EBCDICV.25b NewLineChr CR+LF Nxt CR+LF CR LF 5 of DTE Dialer Configuration OptionsDTR Cont Repeat Disable End Disable Enable Line Dialer 1 of Line Dialer Configuration OptionsBusyTone Detect Enable Nxt Enable Disable 2 of Line Dialer Configuration OptionsBlind Dial Paus 2sec Nxt 2sec 4sec 6sec 8sec 10sec 20sec ‘‘,” Pause Time 2sec Nxt 2sec 4sec 6sec 8sec 10sec 20secFast Disconnect Disable Nxt Disable Enable 3 of Line Dialer Configuration OptionsLine Crnt Disc Enab8msec Nxt Enab8msec Enab90msec Disable Long Space Disc Enable Nxt Enable DisableNo Carrier Disc 2sec Nxt 2sec 5sec Disable 10sec 20sec 4 of Line Dialer Configuration OptionsNo Data Disc Disable Nxt Disable 10min 30min 60min NoDataDiscTrig Nxt TXD or RXD TXD and RXD TXD Only RXD OnlyAuto Make Busy Disable Nxt Disable Enable 5 of Line Dialer Configuration OptionsMakeBusyViaDTR Disable Nxt Disable Enable DTR Auto RedialDial Line 1 of Dial Line Configuration OptionsV32bis Autorate Enable Nxt Enable Disable StartAt48 StartAt96 2 of Dial Line Configuration OptionsV22b Guard Tone Disable Nxt Disable 550Hz 1800Hz Dial TX Level PermissvV32bis Train Long Nxt Long Short 3 of Dial Line Configuration OptionsFallFwdDelay Disable End Disable 5mins 15mins 1hour Leased Line 1 of Leased Line Configuration OptionsV32bis Autorate Enable Nxt Enable Disable 2 of Leased Line Configuration Options2W SQ Retrain Disable Nxt Disable 1 2 3 4 1800HzTrainTone Disable Nxt Disable EnableBdLn Auto Orig Disable Nxt Disable Enable FastBackup 2min 5min 10min 3 of Leased Line Configuration OptionsAuto Redial 4 of Leased Line Configuration OptionsRate Auto Orig Disable AutoDialStandby Disable 5 of Leased Line Configuration OptionsV29 TrainOnData Disable Nxt Disable Enable FallFwdDelay Disable End Disable 5mins 15mins 1hourV.42/MNP/Buffer 1 of V.42/MNP/Buffer Configuration OptionsErr Contrl Mode cont 2 of V.42/MNP/Buffer Configuration OptionsV42bis Compress Enable Nxt Enable Disable MNP5 Compress Enable Nxt Enable DisableEC Negotiat Bfr Disable Nxt Disable Enable Disab&Switch 3 of V.42/MNP/Buffer Configuration OptionsFlw Cntl of DTE CTStoDTE Nxt CTStoDTE Disable XON/XOFF EC Fallbck Char 013 ASCI Nxt 013 ASCIFlw Cntl of Mdm Disable Nxt Disable XON/XOFF RTStoMdm 4 of V.42/MNP/Buffer Configuration OptionsXON/XOFF Psthru Disable Nxt Disable Enable Mdm/Mdm FlowCtl Disable Nxt Disable EnableTXBuffDiscDelay 10sec Nxt 10sec 60sec Disable 5 of V.42/MNP/Buffer Configuration OptionsBreak Buffr Ctl KeepData Nxt KeepData DiscardData Send Break Cntl DataFirst Nxt DataFirst BreakFirstRxBuffDiscDelay Disable Nxt 0sec 60sec Disable 6 of V.42/MNP/Buffer Configuration OptionsCellularEnhance End Disable Enable Max Frame Size Nxt 256 192 128 64 32Tests 1 of Test Configuration OptionsV54 Device Type Peripheral End Peripheral Intermediate 2 of Test Configuration OptionsV54 Address Disable Nxt Disable Address Values Misc 1 of Miscellaneous Configuration OptionsSpeaker Volume Medium Nxt Medium Low High 2 of Miscellaneous Configuration OptionsAccess frm Remt Enable Nxt Enable Disable Dir#1Callback Disable Nxt Disable EnableNxt CallCnct&Prg Disable CallCnctOnly CallProgOnly 3 of Miscellaneous Configuration OptionsNMS DTR Alarm Disable Nxt Disable Enable NetMngmtAddress 256 NxtNetworkPosition Tributary Nxt Tributary Control 4 of Miscellaneous Configuration OptionsCellulrRJ11Adpt Disable End Disable Enable 1 of Security Configuration Options Security Configuration OptionsGetUserID Disable Nxt Disable Enable 2 of Security Configuration OptionsDTEPWBkSpChar 008 Nxt NMSReporting NxtControl Branch Control BranchIdle Control Remote OverviewSpeaker ResetAT Command Equivalent AT Command EquivalentControl Reset MakeBusy Service Line/Disconnect Service LineMake Busy Command Complete Control ServiceLineClone To Remote DownLoad Code14,400 bps = 10 minutes 9600 bps = 15 minutes AT Command EquivalentRemClone Status Establish Remote Warning Download ReprogramRemoteRemClone Status Initializing RemClone Status Bank 1 xxxx/yyyyDownload Failure Automatic Firmware DownloadTo Local via DTE Remote Remote BranchOverview Remote Branch Figure 11-1. Top-Level Menu of a Remote 3800 Series Modem Online Control ExitRemSeptember COMSPHERE 3800 Series Modems11-4 3810-A2-GB30-30Overview SecurityAnswer Access Security Originate Access SecurityVF-Side Passwords PRESS EnterTYPE abc123 PRESS Enter DTE-Side PasswordsCombination of VF-Side and DTE-Side Passwords Security Security BranchAdministrative Password Set Access CtrlEditPasswdTable Access CtrlSelect Index Ent Access CtrlPsWdType Nxt Cleared DTEEntry VFEntry VFplusDTE Edit Password Table Group OptionsEdit PsWd Nxt yyyyyyyy or zzzzzz Save Edit? Edit Save Yes NoSet Answer Security Group Options Set Answer SecSet Originate Security Group Options Set Orig SecReset Security Set Admin PsWdPRESS Enter Security Password Entry TechniquesAnswer Access Password VF-Side and DTE-Side Entry Techniques Using VF-Side Passwords Originate Access PasswordVF Password Only PasswordDTE Password Only Security Database Table Using DTE-Side PasswordsSecurity Database Table Using Both VF-Side and DTE-Side Passwords VF and DTE PasswordsVF and DTE Passwords Security Database Table Using Paired VF-Side and DTE-Side PasswordsPassword IndexOverview Fax OperationFax Operation The DCP is disabled during fax operation Switching Between Data Mode and Online Command Mode AT Command Set and S-Registers14Operating Modes Escape Sequence and Escape Guard TimeTYPE ATO PRESS Enter Command GuidelinesAT Command List 3800 Series AT Commands AT Command FormatCommand TYPECommand 3800 Series AT CommandsCommand Character Echo Hook Switch ControlCommand 3800 Series AT Commands3 of DescriptionFront Panel 4 of 3800 Series AT CommandsCommand Configuration Options3800 Series AT Commands 5 ofCommand Reset and Load ActiveCommand 6 of 3800 Series AT CommandsSelect Factory Default Configuration Options Command Value3800 Series AT Commands 7 ofCommand Leased ModeCommand 8 of 3800 Series AT CommandsAsync/Sync Mode and DTE Dialer Type DescriptionCommand 9 of 3800 Series AT CommandsView Configuration Options Description3800 Series AT Commands 10 ofCommand Error Control Negotiate BufferCommand 11 of 3800 Series AT CommandsNo Data Disconnect Timer Error Control Fallback Character3800 Series AT Commands 12 ofCommand DescriptionS-Register Format S-Register ListTYPE ATSn? TYPE ATSn=rNo Answer Timeout 2 of 3800 Series S-RegistersS-Register DescriptionTest Timeout 3 of 3800 Series S-RegistersRTS-to-CTS Delay S-RegisterS-Register 4 of 3800 Series S-RegistersDescription Front Panel BranchReceive Buffer Disconnect Delay 5 of 3800 Series S-RegistersS-Register DescriptionS-Register 6 of 3800 Series S-RegistersDescription Front Panel BranchTransmit Buffer Disconnect Delay 7 of 3800 Series S-RegistersS-Register DescriptionAccess From Remote 8 of 3800 Series S-RegistersRemote Access Password Remote Access PasswordS-Register 9 of 3800 Series S-RegistersDescription Front Panel BranchDTR Alarm Reporting 10 of 3800 Series S-RegistersNo Data Disconnect Trigger Signal S-RegisterAT Command Mode 11 of 3800 Series S-RegistersStraps When Disconnected S-RegisterS-Register 12 of 3800 Series S-RegistersDescription Front Panel BranchOverview Menu Tree A2400V22bis COMSPHERE 3800 Series Modems1200V22 1200212AV42/MNPorBfr Menu TreeV42/MNPorDsc MNP or BuffrAdmin Password? ExitRem appears instead of Remote when using Remote ModeSetAnswerSec SetAdminPsWd ResetTable B-1 1 of Result Codes Result Codes BNumbers WordNumbers Table B-1 2 of Result CodesNumbers WordSymptom Troubleshooting CTable C-1 Modem HealthModem - DTE Connection Table C-2Modem - VF Connection Symptom2 of SymptomModem - VF Connection ActionTable C-4 Dial Backup OperationOnline Operation Table C-5Technical Specifications Technical Specifications DTable D-1 1 of Technical Specifications for 3800 Series Modems SpecificationsSpecifications Table D-1 2 of Technical Specifications for 3800 Series ModemsAC POWER REQUIREMENTS POWER CONSUMPTIONSpecifications Table D-1 3 of Technical Specifications for 3800 Series ModemsDIMENSIONS DescriptionSpecifications Table D-1 4 of Technical Specifications for 3800 Series ModemsERROR CONTROL Description1. 2- wire operations 2. 4-wire operations w/o TEK leads VF Connector Pin Assignments3. 4-wire operations with TEK leads Figure E-1. Wiring Diagram - 8-Position to 6-Position Crossover Cable3810 Dial Connector Table E-1 VF Connector Pin Assignments Models 3810 and3820 Dial/Leased Connector Connector J6EIA-232-D Pin Assignments SignalTable E-3 EIA-232-D Pin Assignments RS-232EIA RS-366-A Pin Assignments Signal SourceTable E-4 EIA RS-366-A Pin Assignments RS-366-ACall Request Commands ITU-T V.25bis Dialing Commands F and ResponseCall Request with Number Provided CRN OverviewCall Connecting CNX Call Answer CommandsWhere xx is Call ResponseProgram Normal PRN Command ResponseRequest List of Stored Numbers RLN List Stored Number Response LSNV.25bis Command Table F-1 V.25bis CommandsAT Command Result Code Equivalent EquivalentTable G-1 1 of Factory Default Configuration Options Default Configuration Options GConfiguration Option Answer/Originate ModeAsync Dial and UNIX Dial Default Settings Table G-1 2 of Factory Default Configuration OptionsSync Dial Default Settings Sync Leased Answer/Originate Mode Default SettingsConfiguration Option Table G-1 3 of Factory Default Configuration OptionsAsync Dial and UNIX Dial Default Settings Sync Dial Default SettingsConfiguration Option Table G-1 4 of Factory Default Configuration OptionsAsync Dial and UNIX Dial Default Settings Sync Dial Default SettingsEquipment List H Feature/Part NumberEquipment 3810-A1-0013810-A2-GB30-30 COMSPHERE 3800 Series ModemsSeptember Glossary enabled Glossary-3 Glossarydemodulation Erasable programmable read-only memory ITU-T V.42bis ITU-T JM8 keypad LCD leased line LED ITU-T ITU-T V.22bis ITU-T V.27ter ITU-T ITU-T ITU-T V.32bis ITU-Tlocal analog loopback long space disconnect loopback test LSD menu treepower-up self-test product code programmable interface protocol PSTN off-hook on-hook Originate mode parity PBX permissive interfaceMNP modem modulation network network address NIM NMS physical addresspulse dialing Sync Dial Glossary-10 COMSPHERE 3800 Series ModemsSeptember 3810-A2-GB30-30Numbers IndexPage Page Page Page Page Seepage Set Admin PsWd00282600 3810-A2-GB30-30 3810-A2-GB30-30