Paradyne 3800 manual Model 3820 Dial-Line Connection, Model 3820 2-Wire Leased-Line Connection

Model 3810 and 3820 Installation

Model 3820 Dial-Line

Connection

Use the following procedures to connect a Model 3820 to the dial network interface:

1.Insert the 6-position, 4-conductor modular plug into the jack labeled DIAL / LEASED (3820). See Figure 2-3.

2.Insert the other end of the modular cord into the dial network interface.

Model 3820 2-Wire Leased-Line Connection

Use the following procedures to connect a Model 3820 modem to the 6-pin, center pair, leased-line network interface. For 2-wire leased line connection to a JM8 network interface, refer to Figure E-1 in Appendix E:

1.Insert the 6-position, 4-conductor modular plug into the jack labeled DIAL/LEASED (3820). See Figure 2-3.

2.Insert the other end of the modular cord into the leased-line network interface.

		PHONE	DIAL	NMS
				DTE
0	1
	PWR	LEASED	LEASED
		(3810)	(3820)
				98-13071-02

6-POSITION,

4-CONDUCTOR PLUG FOR TELEPHONE SET

6-POSITION, 4-CONDUCTOR PLUG FOR PERMISSIVE DIAL NETWORK OPERATION (CONNECTS WITH RJ11C TYPE JACK)

– OR –

2-WIRE LEASED-LINE NETWORK OPERATION (CONNECTS WITH 6-POSITION CENTER PAIR LEASED JACK)

Figure 2-3. Model 3820 Rear Panel

3810-A2-GB30-30 September 1998 2-5