Safety Instructions

Important Safety Instructions

1.Read and follow all warning notices and instructions marked on the product or included in the manual.

2.This product is intended to be used with a three-wire grounding type plug – a plug which has a grounding pin. This is a safety feature. Equipment grounding is vital to ensure safe operation. Do not defeat the purpose of the grounding type plug by modifying the plug or using an adapter.

Prior to installation, use an outlet tester or a voltmeter to check the ac receptacle for the presence of earth ground. If the receptacle is not properly grounded, the installation must not continue until a qualified electrician has corrected the problem.

If a three-wire grounding type power source is not available, consult a qualified electrician to determine another method of grounding the equipment.

3.Slots and openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these slots and openings must not be blocked or covered.

4.Do not allow anything to rest on the power cord and do not locate the product where persons will walk on the power cord.

5.Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous high voltage points or other risks. Refer all servicing to qualified service personnel.

6.General purpose cables are provided with this product. Special cables, which may be required by the regulatory inspection authority for the installation site, are the responsibility of the customer.

7.When installed in the final configuration, the product must comply with the applicable Safety Standards and regulatory requirements of the country in which it is installed. If necessary, consult with the appropriate regulatory agencies and inspection authorities to ensure compliance.

8.A rare phenomenon can create a voltage potential between the earth grounds of two or more buildings. If products installed in separate buildings are interconnected, the voltage potential may cause a hazardous condition. Consult a qualified electrical consultant to determine whether or not this phenomenon exists and, if necessary, implement corrective action prior to interconnecting the products.

In addition, if the equipment is to be used with telecommunications circuits, take the following precautions:

Never install telephone wiring during a lightning storm.

Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.

Never touch uninsulated telephone wires or terminals unless the telephone line has been disconnected at the network interface.

Use caution when installing or modifying telephone lines.

Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.

Do not use the telephone to report a gas leak in the vicinity of the leak.

3810-A2-GB30-30

September 1998

B

Page 4
Image 4
Paradyne 3800 manual Important Safety Instructions

3800 specifications

The Paradyne 3800 is a versatile broadband access platform that has gained recognition for its impressive features and robust performance in delivering high-speed data communications. Designed to meet the demands of both residential and commercial environments, the Paradyne 3800 stands out with its innovative technologies and reliable characteristics.

One of the main features of the Paradyne 3800 is its capability to support multiple protocols, including Ethernet, IP, and ATM. This multi-protocol flexibility allows service providers to offer a range of services, from high-speed Internet access to voice over IP (VoIP) and video conferencing. This adaptability makes it an ideal solution for diverse customer requirements, enhancing service delivery and customer satisfaction.

The Paradyne 3800 utilizes advanced DSL technologies, most notably ADSL and ADSL2+, to provide high-speed internet services over existing copper telephone lines. With a maximum downstream rate of up to 24 Mbps, the 3800 ensures fast data transfers, making it suitable for bandwidth-intensive applications such as streaming and online gaming. Additionally, the device supports bonding capabilities, allowing multiple DSL lines to work together, effectively increasing bandwidth and enhancing overall performance.

Built with scalability in mind, the Paradyne 3800 allows for easy upgrades and expansions. Service providers can seamlessly add more capacity or features as demand grows without significant overhauls to the existing infrastructure. This scalability is complemented by an intuitive management interface, which simplifies network configuration, monitoring, and troubleshooting.

Security is another key characteristic of the Paradyne 3800. It employs various encryption methods and security protocols to safeguard user data and ensure secure communications. This focus on security is increasingly important in today’s cyber landscape, where protecting sensitive information is paramount.

In summary, the Paradyne 3800 is a sophisticated broadband access platform that combines cutting-edge technologies, multiple protocol support, and robust security features. Its scalability, high performance, and ease of management make it an attractive option for service providers looking to enhance their offerings and deliver reliable connectivity to their customers. Whether it’s for high-speed internet, voice, or video services, the Paradyne 3800 is positioned as a dependable solution in the evolving telecommunications landscape.