Emerson ATCA-S201 manual ISCSI device setup tools, ISCSI configuration menu

RTM-ATCA-SXXX Overview

7iSCSI device setup tools

Configuration Step:

1	2	3	4	5	6
RS232	Ethernet	RAID	Logical Volume	iSCSI	NFS / SMB
Console Setup	Comm. Setup	LUN Setup	Setup	Device Setup	Share Setup

This chapter explains how to create one or more iSCSI LUNs for external host access. The user must complete step 4 before this step can be accomplished.

AMC disk		Physical	Logical	iSCSI & NAS	5
modules		disks	groups
			&
Site: B1			volumes	iSCSI
	HW RAID	sda	vga	LUNs
Site: B2					Zone-2 Fabric
						IP network
Site: B3	1:1 mapping (JBOD)	sdb		NFS	Zone-2 Base	IP host
				share points	Zone-3 RTM
Site: B4	1:1 mapping (JBOD)		vgz
		sdc
				CIFS
				share points

7.1iSCSI configuration menu

Using the HTML configuration tool, navigate to this configuration page .

Emerson ATCA-S201  iSCSI  iSCSI Configuration

This top html menu provides the ability to create an iSCSI target on a device (e.g. /dev/vga/lva0) that was previously committed for iSCSI block I/O share (see chapter ).

7.1.1Add or create an iSCSI target

These are the final steps to make an iSCSI device ‘appear’ on the IP network.

6806800H62B ATCA‐S201 Installation and Use Guide 80