Kramer Electronics PL-150 user manual Configurations Screen

Connecting the PL-50 Power Controller - Monitor

6.3.8The Configurations Screen

The Configurations page lets you view and change some Ethernet settings1 (see Figure 25) and also set the security level.

To change Configuration definitions:

1.Click Configurations. The Configurations Web page appears.

2.Change the definitions as required.

3.Click the Submit button to apply changes2. A window appears asking if you are sure you want to change the network settings.

4.Click Yes.

A window appears announcing that the configuration has been successfully changed.

5.Click OK

6.If the IP number had been changed, close the browser and reload the Web page.

Figure 25: Configurations Embedded Web Page

HELP BOX

This page lets you view and set the device configuration.

1 The model name, serial number, firmware version and MAC address 2 Or Cancel to cancel changes

24 KRAMER: SIMPLE CREATIVE TECHNOLOGY