Help BOX | Kramer Electronics PL-150 instruction

Connecting the PL-50 Power Controller - Monitor

After scheduling the outlets, the Scheduler screen appears as follows:

Figure 17: Scheduling the Outlets

In Figure 17, the channels are scheduled at different times. For example:

•On Monday, Channel 2 will be ON from 12:00 to 13:00 and Channel 5 will be ON from 12:00 to 14:00

•On Tuesday, Channel 2 will be ON from 08:00 to 09:31, from 12:00 to 14:00 and from 15:00 to 18:00.

•On Tuesday all the channels are scheduled to be ON from 08:00 to 09:31 and on Thursday Channels 1, 4 and 5 are scheduled to be ON from 15:00 to 18:00 (see section 6.3.7 for setting the power ON/OFF order)

You can clear a checkbox next to a time period setup in the scheduler table to delete a scheduled time period. Click Submit to save the schedule to the PL-50.

HELP BOX

This page lets you view and set the ON/OFF scheduling of the channel. Note, that the device will store the new scheduling only after you click "Submit".

You can also view and set the current time.

17

Image 21

Kramer Electronics PL-150 user manual Help BOX

Contents

Model Contents Instruction Codes43 Figures Tables Getting Started IntroductionP3K Wizard Software Quick Start Getting Started Ethernet Overview Your PL-50 Power Controller Monitor Your PL-50 Power Controller Monitor PL-50 Power Controller Monitor Front Panel Feature Function PL-50 Power Controller Monitor Features Before Installing in a Rack Installing in a Rack Connecting the PL-50 Connecting the PL-50 Power Controller Monitor Controlling the PL-50 via the Ethernet Port Connecting the RelaysRight-click Local Area Connection Properties Local Area Connection Properties window appears Connecting via a Straight-Through Cable Upload Main Screen Click the Connect button Connect screen appears as follows If required, make changes and click Save. If not, click Exit Following window appears Controlling via the Embedded Web Pages Running the Application Panel Screen Scheduler Screen Scheduler Screen Features Help BOX Channel Settings Screen Features Define the Channel Settings screen Define the Alerts screen Alerts Screen Features Setting the Alarms Power Measurement Screen Features Define the Power Measurement screen Power ON/OFF Order Screen This page lets you set the power on and OFF order and delay Configurations Screen Security System Enabled Enable Security System Security System DIP-switch Settings Operating Your PL-50 Power Controller MonitorDIP-switch Definitions Calibrating via the Front Panel Buttons Operating Your PL-50 Power Controller Monitor Upgrading the Firmware Flash Memory Upgrade Upload Screen Click the Connect button Connect Window appears see Figure Connection Time Out Message Machine is now connected Upload Connected Upload Progress Restart Message When the update is finished, the restart message appears Includes the technical specifications Technical SpecificationsTechnical Specifications1 of the PL-50 Changing the Device Parameters Protocol 3000 Syntax Kramer ProtocolHost message format CR LF Command Command Terms Common Commands Name FactoryNAME? NAME? Name Security Commands Result and Error Codes These commands are used by network devices running Protocol Network Setting Commands NET-DHCP? NET-DHCPNET-GATE NET-GATE? Instruction Codes ALARM-ON ALARM-OFFALARM-ON Result ALARM-ON? ALARM-START-AS MES-MODE SwitchLVL SCHED? SWITCH-ORDER SWITCH?SWITCH-ORDER-DELAY SWITCH-ORDER-DELAY? Limited Warranty 2900-000576 REV