Controlling via the Embedded Web Pages | Kramer Electronics PL-150

Connecting the PL-50 Power Controller - Monitor

6.3 Controlling via the Embedded Web Pages

The embedded Web page can be used to remotely operate the PL-50via the Ethernet (see section 6.2).

6.3.1Setting the Embedded Web Page

Before you use the embedded Web pages to control the PL-50via the Ethernet, check that the Java™ software is installed on your computer. If not, download it from: www.java.com.

A description of each Web page appears if you hover with your mouse over the

question mark that appears on the left side of the screen.

To control the PL-50via the embedded Web page, make sure that it is connected to the Ethernet port of your computer and do the following:

1.Open your Internet browser.

2.Type the unit’s IP number1 in the address bar of your browser (or the name, if using DHCP):

Figure 11: Typing the IP Number

The following window appears:

Figure 12: Loading the Embedded Web Pages

1 The default IP number is 192.168.1.39, and may be changed by the system integrator

13

Image 17

Kramer Electronics PL-150 user manual Controlling via the Embedded Web Pages, Following window appears

Contents

Model Contents Instruction Codes43 Figures Tables Getting Started IntroductionP3K Wizard Software Quick Start Getting Started Ethernet Overview Your PL-50 Power Controller Monitor Your PL-50 Power Controller Monitor PL-50 Power Controller Monitor Front Panel Feature Function PL-50 Power Controller Monitor Features Before Installing in a Rack Installing in a Rack Connecting the PL-50 Connecting the PL-50 Power Controller Monitor Controlling the PL-50 via the Ethernet Port Connecting the RelaysRight-click Local Area Connection Properties Local Area Connection Properties window appears Connecting via a Straight-Through Cable Upload Main Screen Click the Connect button Connect screen appears as follows If required, make changes and click Save. If not, click Exit Following window appears Controlling via the Embedded Web Pages Running the Application Panel Screen Scheduler Screen Scheduler Screen Features Help BOX Channel Settings Screen Features Define the Channel Settings screen Define the Alerts screen Alerts Screen Features Setting the Alarms Power Measurement Screen Features Define the Power Measurement screen Power ON/OFF Order Screen This page lets you set the power on and OFF order and delay Configurations Screen Security System Enabled Enable Security System Security System DIP-switch Settings Operating Your PL-50 Power Controller MonitorDIP-switch Definitions Calibrating via the Front Panel Buttons Operating Your PL-50 Power Controller Monitor Upgrading the Firmware Flash Memory Upgrade Upload Screen Click the Connect button Connect Window appears see Figure Connection Time Out Message Machine is now connected Upload Connected Upload Progress Restart Message When the update is finished, the restart message appears Includes the technical specifications Technical SpecificationsTechnical Specifications1 of the PL-50 Changing the Device Parameters Protocol 3000 Syntax Kramer ProtocolHost message format CR LF Command Command Terms Common Commands Name FactoryNAME? NAME? Name Security Commands Result and Error Codes These commands are used by network devices running Protocol Network Setting Commands NET-DHCP? NET-DHCPNET-GATE NET-GATE? Instruction Codes ALARM-ON ALARM-OFFALARM-ON Result ALARM-ON? ALARM-START-AS MES-MODE SwitchLVL SCHED? SWITCH-ORDER SWITCH?SWITCH-ORDER-DELAY SWITCH-ORDER-DELAY? Limited Warranty 2900-000576 REV