Power ON/OFF Order Screen | Kramer Electronics PL-150 instruction

Connecting the PL-50 Power Controller - Monitor

6.3.7The Power ON/OFF Order Screen

The Power ON/OFF Order screen lets you determine the power ON and OFF order for channels that are scheduled to switch ON/OFF simultaneously. This is very convenient for systems that require a specific power up or shut down sequence. Figure 22 and Table 8 define Switch Order screen:

Figure 22: The Power ON/OFF Order Screen

Table 8: The Power ON/OFF Order Screen Features

Feature	Function
Power ON /OFF Order	By default, the channels are set to switch ON/OFF in sequence (from 1 to 5).
	Use the up and down arrows to set to the desired order
ON/OFF Delay	Set the switching ON/OFF delay time for each channel in the switching
	sequence
Read	Click to read the switching order stored in the machine

Submit	Click to submit changes

22	KRAMER: SIMPLE CREATIVE TECHNOLOGY

Image 26

Kramer Electronics PL-150 user manual Power ON/OFF Order Screen

Contents

Model Contents Figures Instruction Codes43 Tables P3K Wizard Software IntroductionGetting Started Quick Start Getting Started Overview Ethernet Your PL-50 Power Controller Monitor Your PL-50 Power Controller Monitor PL-50 Power Controller Monitor Front Panel PL-50 Power Controller Monitor Features Feature Function Installing in a Rack Before Installing in a Rack Connecting the PL-50 Power Controller Monitor Connecting the PL-50 Right-click Local Area Connection Properties Connecting the RelaysControlling the PL-50 via the Ethernet Port Local Area Connection Properties window appears Connecting via a Straight-Through Cable Click the Connect button Connect screen appears as follows Upload Main Screen If required, make changes and click Save. If not, click Exit Controlling via the Embedded Web Pages Following window appears Running the Application Panel Screen Scheduler Screen Features Scheduler Screen Help BOX Define the Channel Settings screen Channel Settings Screen Features Alerts Screen Features Define the Alerts screen Setting the Alarms Define the Power Measurement screen Power Measurement Screen Features Power ON/OFF Order Screen This page lets you set the power on and OFF order and delay Configurations Screen Enable Security System Security System Enabled Security System DIP-switch Definitions Operating Your PL-50 Power Controller MonitorDIP-switch Settings Calibrating via the Front Panel Buttons Operating Your PL-50 Power Controller Monitor Flash Memory Upgrade Upgrading the Firmware Click the Connect button Connect Window appears see Figure Upload Screen Machine is now connected Connection Time Out Message Upload Connected Upload Progress When the update is finished, the restart message appears Restart Message Technical Specifications1 of the PL-50 Technical SpecificationsIncludes the technical specifications Changing the Device Parameters Host message format Kramer ProtocolProtocol 3000 Syntax CR LF Command Terms Command Common Commands NAME? FactoryName NAME? Name Result and Error Codes Security Commands Network Setting Commands These commands are used by network devices running Protocol NET-GATE NET-DHCPNET-DHCP? NET-GATE? Instruction Codes ALARM-ON Result ALARM-ON? ALARM-OFFALARM-ON ALARM-START-AS LVL SwitchMES-MODE SCHED? SWITCH-ORDER-DELAY SWITCH?SWITCH-ORDER SWITCH-ORDER-DELAY? Limited Warranty 2900-000576 REV