Connecting the PL-50 Power Controller - Monitor
21
6.3.6 The Power Measurement Screen
Figure 21 and Table 7 define the Power Measurement screen: Figure 21: The Power Measurement Screen
Table 7: The Power Measurement Screen Features
Feature
Function
Power Status Status indicator per channel:
Measured – if the standby and active values are available (Channel 4 in this
example)
Not Measured – if one or both of the values were not measured (for
example, Channel 1)
Power Measurement Click Standby or active to measure the standby and/or Active values for an
outlet connected to a channel (once measured, the status c hanges from
“Not Measured” to “Measured”)
Click clear to clear the Standby and Active data for that cha nnel1
HELP BOX
This page lets you start the "Standby" and "Active" mode measurement
process. You can also clear the current "Standby" and "Active" thresholds.
1 You can also reset the data for all the channels by pressing the reset button located on the rear panel of the machine (see
Figure 2 and Figure 3) and plugging the power ON while pressing