Kramer Electronics PL-150 user manual Your PL-50 Power Controller Monitor

Your PL-50 Power Controller - Monitor

3.1Terminology Used in this User Manual

Table 1 defines some terms that are used in this user manual:

Table 1: Terminology Used in this User Manual

Term	Definition
802.3	The standard specification for ETHERNET that is maintained by the Institute of Electrical and
	Electronics Engineers (IEEE).
Dynamic Host Configuration	Allows the network administrator to distribute IP addresses from a central point and
Protocol (DHCP)	automatically send a new IP address when an Ethernet point is plugged into a different
	network location.
Gateway	A network position serving as an entry to another network. On the Internet, a node or
	stopping point can be either a gateway node or a host (end-point) node.
IP Address	A 32-binary digit number that identifies each sender or receiver (within a network via a
	particular server or workstation) of data (HTML pages or e-mails) that is sent in packets
	across the Internet. Every device connected to an IP network must have a unique IP
	address. This address is used to reference the specific unit.
Local Area Network (LAN)	Computers sharing a common communications line or wireless link, which often share a
	server within a defined geographic area.
Media Access Control	A computer's unique hardware number (or address) in a LAN or other network. On an
(MAC) Address	Ethernet LAN, the (MAC) address is identical to the Ethernet address.
Transmission Control	The basic communication language or protocol of the Internet that breaks the message into
Protocol/Internet Protocol	appropriately sized packets for the network, and can be used as a communications protocol
(TCP/IP)	in an intranet or an extranet.

4Your PL-50 Power Controller - Monitor

Figure 1 and Table 2 define the PL-50Power Controller - Monitor:

4 KRAMER: SIMPLE CREATIVE TECHNOLOGY