Panel Screen | Kramer Electronics PL-150 guide

Connecting the PL-50 Power Controller - Monitor

6.3.2The Panel Screen

The Panel screen lets you select one or more channels in order to read the Standby or Active values and turn the power outlet ON/OFF:

Figure 14: HOME Embedded Web Page

The connection icon on the top right screen indicates whether the machine is

connected to your PC or not . Click the on-screen channel buttons:

1

2

3

4

5

Figure 15: Selecting a Channel

Each channel button includes red and green indicators. If the indicators appear bright, the Standby or Active values are measured (channel 3 in the example in Figure 15). Otherwise, these values were not measured.

The Help Box

This is the main panel window. In this window you can control the channels.

15

Image 19

Kramer Electronics PL-150 user manual Panel Screen

Contents

Model Contents Instruction Codes43 Figures Tables Quick Start IntroductionGetting Started P3K Wizard Software Getting Started Ethernet Overview Your PL-50 Power Controller Monitor Your PL-50 Power Controller Monitor PL-50 Power Controller Monitor Front Panel Feature Function PL-50 Power Controller Monitor Features Before Installing in a Rack Installing in a Rack Connecting the PL-50 Connecting the PL-50 Power Controller Monitor Local Area Connection Properties window appears Connecting the RelaysControlling the PL-50 via the Ethernet Port Right-click Local Area Connection Properties Connecting via a Straight-Through Cable Upload Main Screen Click the Connect button Connect screen appears as follows If required, make changes and click Save. If not, click Exit Following window appears Controlling via the Embedded Web Pages Running the Application Panel Screen Scheduler Screen Scheduler Screen Features Help BOX Channel Settings Screen Features Define the Channel Settings screen Define the Alerts screen Alerts Screen Features Setting the Alarms Power Measurement Screen Features Define the Power Measurement screen Power ON/OFF Order Screen This page lets you set the power on and OFF order and delay Configurations Screen Security System Enabled Enable Security System Security System Calibrating via the Front Panel Buttons Operating Your PL-50 Power Controller MonitorDIP-switch Settings DIP-switch Definitions Operating Your PL-50 Power Controller Monitor Upgrading the Firmware Flash Memory Upgrade Upload Screen Click the Connect button Connect Window appears see Figure Connection Time Out Message Machine is now connected Upload Connected Upload Progress Restart Message When the update is finished, the restart message appears Changing the Device Parameters Technical SpecificationsIncludes the technical specifications Technical Specifications1 of the PL-50 CR LF Kramer ProtocolProtocol 3000 Syntax Host message format Command Command Terms Common Commands NAME? Name FactoryName NAME? Security Commands Result and Error Codes These commands are used by network devices running Protocol Network Setting Commands NET-GATE? NET-DHCPNET-DHCP? NET-GATE Instruction Codes ALARM-START-AS ALARM-OFFALARM-ON ALARM-ON Result ALARM-ON? SCHED? SwitchMES-MODE LVL SWITCH-ORDER-DELAY? SWITCH?SWITCH-ORDER SWITCH-ORDER-DELAY Limited Warranty 2900-000576 REV