Switch?, Switch-Order | Kramer Electronics PL-150 manual

Kramer Protocol 3000

SWITCH?

	Cmd Short			Description	Command Type					Permission
				Query channel switch	PL-50				User
	Usage:
	Syntax				Response
	SWITCH?				SWITCH?
	SWITCH?	CHNL			SWITCH?	CHNL		,STATUS

CHNL = (1-5)

STATUS = (0=OFF,1=ON,2=ON-SCHEDULER,3=OFF-SCHEDULER ,4=ACTIVE-MEASURE,5=STANDBY-

MEASURE)

SWITCH-ORDER

Cmd Short

Description

Command Type

Permission

Set the switch order

PL-50

Administrator

Usage:

Syntax

Response

SWITCH-ORDER

ON/OFF,

C, C, C, C, C

SWITCH-ORDER

ON/OFF,

C, C, C, C,

C RESULT

= C = (1-5)

= ON or OFF

CHNL

ON/OFF

SWITCH-ORDER?

Cmd Short

Description

Command Type

Permission

Query the switch order

PL-50

User

Usage:

Syntax

Response

SWITCH-ORDER?

SWITCH-ORDER

C, C, C, C, C

ON/OFF

ON/OFF,

= C = (1-5)

= ON or OFF

CHNL

ON/OFF

SWITCH-ORDER-DELAY

Cmd Short

Description

Command Type

Permission

Set the switch order delay

PL-50

Administrator

Usage:

Syntax

Response

SWITCH-ORDER-DELAY

ON/OFF,

0-255 sec

SWITCH-ORDER-DELAY

ON/OFF,

0-255 sec

RESULT

= ON or OFF

ON/OFF

SWITCH-ORDER-DELAY?

Cmd Short

Description

Command Type

Permission

Query the switch order delay

PL-50

User

Usage:

Syntax

Response

SWITCH-ORDER-DELAY?

SWITCH-ORDER-DELAY

0-255 sec

ON/OFF

ON/OFF,

ON/OFF = ON or OFF

46	KRAMER: SIMPLE CREATIVE TECHNOLOGY

Image 50

Kramer Electronics PL-150 user manual Switch?, Switch-Order-Delay?

Contents

Model Contents Figures Instruction Codes43 Tables P3K Wizard Software IntroductionGetting Started Quick Start Getting Started Overview Ethernet Your PL-50 Power Controller Monitor Your PL-50 Power Controller Monitor PL-50 Power Controller Monitor Front Panel PL-50 Power Controller Monitor Features Feature Function Installing in a Rack Before Installing in a Rack Connecting the PL-50 Power Controller Monitor Connecting the PL-50 Right-click Local Area Connection Properties Connecting the RelaysControlling the PL-50 via the Ethernet Port Local Area Connection Properties window appears Connecting via a Straight-Through Cable Click the Connect button Connect screen appears as follows Upload Main Screen If required, make changes and click Save. If not, click Exit Controlling via the Embedded Web Pages Following window appears Running the Application Panel Screen Scheduler Screen Features Scheduler Screen Help BOX Define the Channel Settings screen Channel Settings Screen Features Alerts Screen Features Define the Alerts screen Setting the Alarms Define the Power Measurement screen Power Measurement Screen Features Power ON/OFF Order Screen This page lets you set the power on and OFF order and delay Configurations Screen Enable Security System Security System Enabled Security System DIP-switch Definitions Operating Your PL-50 Power Controller MonitorDIP-switch Settings Calibrating via the Front Panel Buttons Operating Your PL-50 Power Controller Monitor Flash Memory Upgrade Upgrading the Firmware Click the Connect button Connect Window appears see Figure Upload Screen Machine is now connected Connection Time Out Message Upload Connected Upload Progress When the update is finished, the restart message appears Restart Message Technical Specifications1 of the PL-50 Technical SpecificationsIncludes the technical specifications Changing the Device Parameters Host message format Kramer ProtocolProtocol 3000 Syntax CR LF Command Terms Command Common Commands NAME? FactoryName NAME? Name Result and Error Codes Security Commands Network Setting Commands These commands are used by network devices running Protocol NET-GATE NET-DHCPNET-DHCP? NET-GATE? Instruction Codes ALARM-ON Result ALARM-ON? ALARM-OFFALARM-ON ALARM-START-AS LVL SwitchMES-MODE SCHED? SWITCH-ORDER-DELAY SWITCH?SWITCH-ORDER SWITCH-ORDER-DELAY? Limited Warranty 2900-000576 REV