Alarm-Off, Alarm-On, Alarm-Start-As | Kramer Electronics PL-150

Kramer Protocol 3000

ALARM-OFF

Cmd Short

Description

Command Type

Permission

Set alarm OFF

PL-50

User

Usage:

Syntax

Response

ALARM-OFF

ALARM-OFF

RESULT

ALARM-ON

Cmd Short

Description

Command Type

Permission

Set alarm ON

PL-50

User

Usage:

Syntax

Response

ALARM-ON

ALARM-ON

RESULT

ALARM-ON?

Cmd Short

Description

Command Type

Permission

Query alarm status

PL-50

User

Usage:

Syntax

Response

ALARM-ON?

ALARM-ON 1/0

1/0= On OR Off

ALARM-START-AS

Cmd Short

Description

Command Type

Permission

Set alarm Relay mode start

PL-50

Administrator

Usage:

Syntax

Response

ALARM-START-AS 1/0

ALARM-START-AS 1/0

RESULT

1/0= Open/Close

ALARM-START-AS?

Cmd Short

Description

Command Type

Permission

Query alarm Relay mode start.

PL-50

User

Usage:

Syntax

Response

ALARM-START-AS?

ALARM-START-AS 1/0

1/0= Open/Close

ALERT-REG

Cmd Short

Description

Command Type

Permission

Alert Registration

PL-50

Administrator

Usage:

Syntax

Response

ALERT-REG?

ALERT-REG?

CHNL

CHNL

,EVENT

,ACTION

= (1-5)

CHNL

EVENT

= (TO_OFF,TO_ON,TO_FULL,TO_STBY,TO_NONE,ANY_CHANGE)

ACTION

= (NO_ALERT,ALARM, ALL_ALERTS)

44

KRAMER: SIMPLE CREATIVE TECHNOLOGY

Image 48

Kramer Electronics PL-150 Alarm-Off, Alarm-On, ALARM-ON Result ALARM-ON?, Alarm-Start-As, ALARM-START-AS 1/0, Alert-Reg

Contents

Model Contents Figures Instruction Codes43 Tables Introduction Getting StartedP3K Wizard Software Quick Start Getting Started Overview Ethernet Your PL-50 Power Controller Monitor Your PL-50 Power Controller Monitor PL-50 Power Controller Monitor Front Panel PL-50 Power Controller Monitor Features Feature Function Installing in a Rack Before Installing in a Rack Connecting the PL-50 Power Controller Monitor Connecting the PL-50 Connecting the Relays Controlling the PL-50 via the Ethernet PortRight-click Local Area Connection Properties Local Area Connection Properties window appears Connecting via a Straight-Through Cable Click the Connect button Connect screen appears as follows Upload Main Screen If required, make changes and click Save. If not, click Exit Controlling via the Embedded Web Pages Following window appears Running the Application Panel Screen Scheduler Screen Features Scheduler Screen Help BOX Define the Channel Settings screen Channel Settings Screen Features Alerts Screen Features Define the Alerts screen Setting the Alarms Define the Power Measurement screen Power Measurement Screen Features Power ON/OFF Order Screen This page lets you set the power on and OFF order and delay Configurations Screen Enable Security System Security System Enabled Security System Operating Your PL-50 Power Controller Monitor DIP-switch SettingsDIP-switch Definitions Calibrating via the Front Panel Buttons Operating Your PL-50 Power Controller Monitor Flash Memory Upgrade Upgrading the Firmware Click the Connect button Connect Window appears see Figure Upload Screen Machine is now connected Connection Time Out Message Upload Connected Upload Progress When the update is finished, the restart message appears Restart Message Technical Specifications Includes the technical specificationsTechnical Specifications1 of the PL-50 Changing the Device Parameters Kramer Protocol Protocol 3000 SyntaxHost message format CR LF Command Terms Command Common Commands Factory NameNAME? NAME? Name Result and Error Codes Security Commands Network Setting Commands These commands are used by network devices running Protocol NET-DHCP NET-DHCP?NET-GATE NET-GATE? Instruction Codes ALARM-OFF ALARM-ONALARM-ON Result ALARM-ON? ALARM-START-AS Switch MES-MODELVL SCHED? SWITCH? SWITCH-ORDERSWITCH-ORDER-DELAY SWITCH-ORDER-DELAY? Limited Warranty 2900-000576 REV