Emerson ATCA-S201 Enable Html browser access, Html Security certificates https, Html login screen

RTM-ATCA-SXXX Overview

4.1Enable HTML browser access

The web browser configuration tool may be enabled or disabled for security reasons.

CLI command syntax

Table 10 CLI command syntax, enable/disable GUI access

Convention	atca_blade set_gui <enable> +
< enable>	01
	Value 0 disables the GUI, value 1 enables the GUI.

4.2HTML Security certificates (https:// )

The user may perform HTML configuration with any browser that supports https . Direct your browser to the any active IP port on the ATCA-S201. The ATCA-S201 employs https (encrypted secure sockets layer- SSL) technology to protect configuration activity that occurs over IP links. The ATCA-S201 issues a self-signed certificate, identified as “EMERSON”. This certificate is not registered with a certificate authority, and the browser will pop up a warning as shown below. Users must accept the certificate to proceed.





4.3HTML login screen

A user login is required to access and operate the ATCA-S201 storage blade. This menu prompts the user for username and password. When shipped from the factory, the default entries are username=admin, password=admin. See section 3.2.1for the information on the Password change procedure.

StorBlade99 ATCA-S201 Enter Username and Password

Username:

Password:

Submit

6806800H62B ATCA‐S201 Installation and Use Guide 35