Emerson manual Specifications for the ATCA-S201, Physical dimensions, Power Requirements

RTM-ATCA-SXXX Overview

10ATCA-S201 Mechanical and Connector Information

This chapter provides the specifications and connector pin outs for the ATCA-S201 module.

10.1 Specifications for the ATCA-S201

This section provides mechanical, electrical, environmental, and other relevant physical information.

10.1.1 Physical dimensions

The ATCA-S201 is an 8U (280 mm) height board with 325 mm in depth for standard applications. It complies with IEEE 1101.11 mechanical standards, as required by the PICMG 2.0 Revision 3.0 specification. The ATCA-S201 is keyed to conform to the PICMG 2.10, Keying of ATCA Boards and Backplanes specification.

10.1.2 Power Requirements

The ATCA-S201 includes a stacked power supply module with maximum rated output of 210 W of power. This represents a surplus of power vs. the expected power consumption. The power consumption of the RTM is limited to 25 W maximum. The unpopulated base blade (no AMC or RTM) blade will consume 1.04 A at 48 V (50 W).

10.1.3 Environmental Specifications and Compliance

The environmental specifications for the ATCA-S201 assembly are presented in the table below.

6806800H62B ATCA‐S201 Installation and Use Guide 105