Emerson ATCA-S201 manual NEW System Configuration

	2.10.1		To Verify the Hardware Installation	19
3	NEW SYSTEM CONFIGURATION			20
	3.1	RS232 CONSOLE PORT		21
	3.1.1		System boot overview	21
	3.1.2		Flash boot device contents	22
	3.1.3		Linux serial console shell window	23
	3.2	DEFAULT BLADE LOGIN ACCOUNTS AND PASSWORDS		23
	3.2.1		Password change procedure	23
	3.2.2		Password recovery procedure	23
	3.3	FACTORY RESET		24
	3.4	CONFIGURING A NEW ATCA-S201BLADE		24
	3.4.1		Serial ports	24
	3.4.2		Ethernet ports	24
	3.4.3		Management Configuration via HTML browser	25
	3.4.4		Management configuration via secure shell (SSH)	25
	3.4.5		Management configuration via serial console shell	25
	3.5	COMMAND LINE CONFIGURATION TOOL		26
	3.5.1		Change IP address of any Ethernet resource	26
	3.5.2		Shell, configuration scripting options	28
	3.6	NEW SYSTEM CONFIGURATION, NO DHCP SERVER		29
	3.6.1		U-boot console tool	30
	3.6.2		Essential U-boot user commands	30
	3.6.3		U-boot environment variables	31
	3.6.4		Manually assign management IP addresses	32
	3.7	NETWORK BOOT PROCEDURE		33
4	NETWORK CONFIGURATION			34
	4.1	ENABLE HTML BROWSER ACCESS		35
	4.2	HTML SECURITY CERTIFICATES (HTTPS:// )		35
	4.3	HTML LOGIN SCREEN		35
	4.3.1		Auto logout inactivity period	36
	4.3.2		Single session management override	36
	4.4	HTML HOME PAGE		36
	4.5	ESSENTIAL SYSTEM CONFIGURATION STEPS		37
	4.6	SYSTEM IDENTIFICATION AND TIME ZONE ATTRIBUTES		38
	4.6.1		Hostname	39
	4.6.2		Domain Name	39
	4.6.3		Date	39
	4.6.4		Time	40
	4.6.5		Time Zone	40
	4.6.6		Name Server list	41
	4.6.7		NTP Server list	41
	4.6.8		Network time protocol - NTP (On/Off)	42
	4.6.9		Ethernet network port identification	42
	4.6.10		Enable (online/offline)	43
	4.6.11		DHCP	43
	4.6.12		IP address	43
6806800H62B ATCA-S201ATCA-S201 Installation and Use Guide				ii