Emerson ATCA-S201 manual Shell, configuration scripting options, Change Network Settings?

RTM-ATCA-SXXX Overview

At this point the user may inspect the list. If the user wishes to modify any of the listed values, enter ‘y’ at the above prompt. The configuration utility will then display each parameter, one at a time. The user may accept the default input by pressing the ENTER key, or enter a replacement value. In the example below, the user will change the Hostname for the blade.

Change Network Settings? [n]: y

-------------- System Identification and TimeZone Active Settings -----

0: Hostname=[BladeHost]: STOR200

Changing Hostname= from Emerson1 to STOR200

1:DomainName=[Emerson.com]:

2:Date=[12/19/2007]:

...

48:enable4=[1]:

49:dhcp4=[0]:

50:ipaddr4=[192.168.44.11]:

51:netmask4=[255.255.255.0]:

52:broadcast4=[192.168.44.255]:

53:gateway4=[192.168.44.1]:

54:hwaddr4=[00:11:0D:D0:08:04]:

55:MTU4=[9000]:

In the previous example, the user elected to change the hostname from Emerson1 to STOR200. Also note, the tool prints a index number preceding each parameter. Hit the Enter key to proceed through the rest of the list. After displaying the final parameter, the configuration tool presents the user with two questions:

Save New Network Settings? [y]: n

Change Network Settings? [n]: n

Configuration tool question	Possible responses
Save New Network Settings?	y, changes are immediately applied, and
	all changes are stored in non-volatile
	ram flash device. This action ensures the
	changes are remembered after reboot.
	n, do not store changes in NVRAM
Change Network Settings?	y, changes are immediately applied, but
	new values are NOT stored in non-
	volatile flash device. They will revert to
	previous stored on rebbot.
	n, discard the changes, and return to
	the main menu.

3.5.2Shell, configuration scripting options

The “atca_blade” tool supports scripted invocations, to apply a fixed set of parameter values from a file. Such files would contain a pre-determined set of

6806800H62B ATCA‐S201 Installation and Use Guide 28