Emerson ATCA-S201 Hostname, Domain Name, Date, CLI command syntax, set network property hostname

RTM-ATCA-SXXX Overview

System Identification and TimeZone

	HostName	DomainName	Date	Time	TimeZone	Nameservers	NTP Server List	Use
								NTP
Active	StorBlade99	domain.com	4/6/2009	08:51:59	New_York	0.0.0.0	tick.usask.ca	y
Settings							tock.usask.ca
New	StorBlade99	domain.com	4/6/2009	08:51:59	New_Yorkˇ	0.0.0.0	tick.usask.ca	
Settings								NTP

4.6.1Hostname

<Read/Write>The user may assign a human friendly name to the ATCA-S201 instance. The hostname is printed at the top of all menus, and listed in configuration and logs files. Users are encouraged to assign different hostnames to each blade; however there is no actual requirement to make unique assignments within a namespace.

CLI command syntax

Table 12 CLI command syntax, set network property: hostname

Convention

< hostname>

atca_blade set_network Y 0+ <hostname> +

Any combination of letters or digits, no spaces

4.6.2Domain Name

<Read/Write>The user may use this field to specify the registered domain name in which the product will operate (e.g. emerson.com or example.net). In practice, this name should be officially assigned and recorded with the domain name registrar.

CLI command syntax

Table 13 CLI command syntax, set network property: domain name

Convention

<domain>

atca_blade set_network Y 1+ <domain> +

Argument represents new domain name, e.g. yourdomain.com

4.6.3Date

<Read/Write> The user may manually adjust the system date, if NTP is NOT enabled. Date must be entered as month/day/year. (e.g. 3/15/2008).

Note: The date will display as Jan 1 2000 when NTP is disabled, or no NTP server is found.

6806800H62B ATCA‐S201 Installation and Use Guide 39