RTM-ATCA-SXXX Overview

Emerson ATCA-S201

 

iSCSI

iSCSI Configuration + nfs

+ smb

+ Shares + LVM2

+ MD RAID

+ Hardware RAID + Physical Disks + Maintenance

StorBlade99 ATCA-S201 iSCSI Configuration Global Settings

iSNSServer

None

iSNSAccessControl

No

Submit Changes

Add an iSCSI Target

 

 

 

 

Figure 26 HTML tool, Emerson ATCA-S201 iSCSI iSCSI Configuration

Follow these instructions to create a new iSCSI target

Step 1. Click the ‘add an iSCSI Target’ button.

After confirming the popup, the iSCSI configuration tool page changes, and will display a list of operating attributes for the new iSCSI target. The menu will also include a new section to create an iSCSI LUN (see next section).

7.1.2Add or create an iSCSI LUN

The final step in defining a usable iSCSI resource requires the creation of one or more iSCSI LUNs. A LUN (Logical Unit Number) is an addressable entity on the iSCSI target. A target may have several LUNs, and each LUN maps one-to-one with a logical share device. When an external host subsequently connects to the iSCSI target, it may write to a LUN, which again is mapped to the logical device. An external host may partition and format each LUN individually and write independent data.

CLI command syntax

Table 32 CLI command syntax, create iSCSI share

Convention:

atca_blade set_iscsi

This command invokes an interactive session to modify the iSCSI setting of the blade. The command will spawn a series of Yes/No questions which guide the user the iSCSI configuration options. The command session and responses can be scripted to automate a common configuration setup on multiple blades.

6806800H62B ATCA‐S201 Installation and Use Guide

81

Page 91
Image 91
Emerson ATCA-S201 manual Add or create an iSCSI LUN,  Follow these instructions to create a new iSCSI target