Emerson ATCA-S201 Mechanical and Connector Information, Specifications for the RTM-ATCA-SXXX

13 RTM-ATCA-SXXX

Mechanical and Connector Information

This chapter provides the specifications and connector pin outs for the RTM-ATCA-SXXX.

13.1 Specifications for the RTM-ATCA-SXXX

This section provides mechanical, electrical, environmental, and other relevant information.

13.1.1 Physical Dimensions

The RTM-ATCA-SXXX is an 8U (233.35 mm) height board with 80 mm in depth for standard applications. It complies with IEEE 1101.11 mechanical standards, as required by the PICMG 2.0 Revision 3.0 specification. The RTM-ATCA-SXXX is keyed to conform to the PICMG 2.10, Keying of ATCA Boards and Backplanes specification.

13.1.2 Power Requirements

There are several manufacturing options for the RTM. Be sure to validate the host chassis, can supply the RTM slot with these maximum current requirements.

Table 59 Max RTM Module Current Requirements

Module Current	ATCA-S201-0
	(No Disk)
+12V (spin up < 100	0.55A(6.6W)
μsec)
+12v normal	0.55A (6.6W)
operating
+12v (idle)	0.55A (6.6W)
OFF STATE	LESS THAN
	0.4W

ATCA-S201-2 (Two disk version)

2.05A (25W) (staggered spin-up) 2.05A (24.6W)

1.55A (18.6W) LESS THAN 0.4W

13.1.3 Environmental Specifications and Compliance

The environmental specifications for the RTM-ATCA-SXXX assembly are presented in the table below.

6806800H62B ATCA-S201ATCA-S201 Installation and Use Guide 129