Emerson ATCA-S201 manual Time Zone, CLI command syntax, set network property system date

RTM-ATCA-SXXX Overview

CLI command syntax

Table 14 CLI command syntax, set network property: system date

Convention

<date>

atca_blade set_network Y 2+ <date> +

Date format MM/DD/YYYY, (month,day,year)

4.6.4Time

<Read/Write> The user may manually adjust the system time, if NTP is NOT enabled. Date must be entered as hours/minutes/seconds. (e.g. 14:51:59 to indicate 2:51 PM and 59 seconds).

CLI command syntax

Table 15 CLI command syntax, set network property: system time

Convention:

<time>

atca_blade set_network Y 3+ <time> +

hh:mm:ss (for example, 01:23:45), where hh (00 to 23), mm and ss (00 to 59)

4.6.5Time Zone

<Read/Write> World Time references are synchronized with GMT. The drop-down time zone field allows the user to choose a city matching the physical deployment region and daylight savings observance. To minimize code size, only one city per world time zone was chosen. The valid list of drop down field are shown in Table 17 Time Zone Selections.

CLI command syntax

Table 16 CLI command syntax, set network property: system time zone

Convention:

<zone>

atca_blade set_network Y 4+ <zone> +

Pick from list in Table 17 Time Zone Selections. E.g. New_York, Chicago etc.

6806800H62B ATCA‐S201 Installation and Use Guide 40