Emerson ATCA-S201 manual Management Configuration via Html browser

RTM-ATCA-SXXX Overview

Note: If no DHCP server is present, the ATCA-S201 will deactivate this port. The serial console must be then used to manually assign an IP address. This manual initialization procedure is described in section 3.6 of this manual.

3.4.3Management Configuration via HTML browser

Once the IP address of the Ethernet port is known, an administrator may use a web browser to connect to the ATCA-S201 to perform and monitoring or configuration tasks. For security, the browser must support secure https connections on TCP port 443.

Example: Type this address into the address field of your web browser:

https://192.168.1.xxx

Refer to chapter 4 , which begins the explanation and use of the html configuration tool.

3.4.4Management configuration via secure shell (SSH)

Once the IP address of the Ethernet port is known, an administrator may use a SSH service to connect to the ATCA-S201 and to facilitate command line management.

For example:

ssh 192.168.1.211 –l admin

3.4.5Management configuration via serial console shell

If the boot is not interrupted and has completed, the RS232 port accepts administrator login for Linux shell access, and access to command line configuration tools.

*******************************************************

*		*
* Welcome to the Emerson ATCA-S201 Storage Blade		*
*		*
* Type atca_blade to manage this blade, or use the		*
*	Web Based Management tool by browsing to:	*

* https://ipaddr, where		ipaddr is the network address *
*	of	the blade.	*
*			*

*******************************************************

WebHost.WebDomain login: admin Password:admin

After successful login, the user may run any the shell configuration tools presented in section 3.4.5.

6806800H62B ATCA‐S201 Installation and Use Guide 25