Introduction 25
KIRK Wireless Server 600v3 Installation and Configuration Guide
2.1.4.1 Auto Login and Handover
Auto login refers to the ability to log on to more than one system, enabling you to use the
same handset on up to 10 different systems. If a handset is subscribed to two or more
systems, you can use Auto Login type A or Auto Login type B to change between the
systems automatically:
• Auto Login type A is used if a handset is subscribed to two or more systems. Auto
Login A should only be used in separate systems without overlaps.
• Auto Login type B is used if a handset is subscribed to two systems only. Auto Login
B can be used in separate systems which are overlapping each other.
Note: Auto Login type B is only supported in 4020/4040/4080 Handsets.
For more information about Auto Login, refer to “Subscribing KIRK Handsets” on page
152.
Handover refers to the ability to move between the coverage areas of different radio units
(mix of primary and secondary KWS600v3 and repeaters) on the same system while
talking, without interruptions in the conversation.
2.1.5 KIRK SIO Application Interface
The SIO Application Interface is a communication platform allowing text messaging
between the wireless server and a handset. With the SIO API, which is a fundamental
part of all our wireless solutions, and a third party application program, the customer is
offered a wide range of usage opportunities in a variety of vertical markets.
2.1.6 KIRK Maintenance Software
The following software applications for the installation and maintenance of the
KWS600v3 are provided:
• Web based Administration Page
Used for programming of the KWS600v3 and registration of handsets.
• Configuration Tool
Used for programming of the KWS600v3.
•ServiceTool
Used for programming of the repeater, adjustment of the handset and software
download to repeater/handset.
Note: ServiceTool is not used for adjustment of the 5020 Handset.
The ServiceTool application can be downloaded from www.polycom.com.