Polycom 14117800 manual Registering Handsets Using H.323 Protocol

KIRK Handset Registration and Subscription 147

3In the Long Name field, type any name. It is recommended to type the same information as in the Name field (see step 4 below).

4In the Name field, type SEP followed by the IPEI number of the handset.

The serial number (IPEI number) consists of a five-digit handset type (manufacturer code) and a seven-digit handset number.

For more information about retrieving the IPEI number (serial number), refer to Retrieving the Serial Number of the KIRK Handset on page 73

For more general information about the IPEI number (serial number), refer to “Registering KIRK Handsets” on page 145.

5In the Number field, type a number (e.g. 320).

Note: The number must be unique. It is recommended to type the local number used in the CallManager.

6In the Auth. Name field, enter the auth. name (SIP and H323 only).

7In the Password field, enter the password (SIP and H323 only).

8In the Display Text field, type a standby text (max. 36 characters) to be displayed when the handset is on hook.

9In the IPEI field, type the IPEI number of the handset.

10In the Auth. Code field, type the authentication code (AC) (optional).

The authentication code is a subscription password of a maximum eight digits, defined by the technicians, and can be used when connecting the handset to the KWS600v3. The authentication code is a subscription pin code for the individual handset.

Note: Entering authentication code overrides the AC setting defined for the Master KWS600v3 under Configuration/DECT/System on the Administration Page.

11Click Apply.

12Repeat step 1 to 9 for each new handset to be registered to the system.

13Click OK to save the registration(s).

In the DECT/Users page the new handset/user now has the status Pending, meaning that it is ready for subscription.

8.1.2 Registering Handsets Using H.323 Protocol

1Under Administration menu, click DECT, and then click Users. The following window appears.

KIRK Wireless Server 600v3 Installation and Configuration Guide