Polycom 14117800 manual Configuring the Alternative Master Kirk Wireless Server

Configuring KIRK Wireless Server 600v3 129

4In the LDAP area:

The Master KWS600v3 is automatically defined as the LDAP Server.

If you need to configure a standalone LDAP Server in your system, you must deselect the Master is LDAP Server check box.

Note: If deselecting the Master is LDAP Server check box on the Master tab, an LDAP Server tab becomes available. For more information about configuring a standalone LDAP Server, refer to “” on page 132.

5In the Radio field:

•Select the Disable check box to disable the radio.

6In the License area:

•Click Browse to search for the text file containing license information, select it, and then click Open.

Note: Remember to obtain a multi-cell license. (E-mail the MAC address to emeadkordermanagement@polycom.com and require a multi-cell license for the KWS600v3).

7Save the configuration now or wait until you have finished configuring the whole installation.

For more information about saving the configuration, refer to “Saving Configurations” on page 141.

7.8.2 Configuring the Alternative Master KIRK Wireless Server 600v3

This section describes how to configure an alternative (Standby) Master KWS600v3 in a multi-cell solution. In case the Master KWS600v3 stops working, the alternative (Standby) Master KWS600v3 will take over connection to the call handler.

Note: Configuring an alternative Master KWS600v3 is optional - and only recommended - if you have a very large multi-cell installation (number of KWS600v3 and/or handsets).

KIRK Wireless Server 600v3 Installation and Configuration Guide