74Preparing KIRK Handset for Use

6.6.1 Retrieving Serial Number on KIRK 3040 Handsets

1Press down the back cover and push it 5 mm towards the headset plug.

Figure 9 Remove Back Cover from Handset

2Lift off back cover.

3Lift the battery and read the serial number.

4Replace battery and back cover.

Note: To show the serial number on the handset display, press *99984*, and then press 3; the serial number appears on the handset display. Press < for 5 seconds to exit the menu.

6.6.2 Retrieving Serial Number on KIRK 4020/KIRK 4040/KIRK 4080 Handsets

1Use a screwdriver to unscrew the plate on the rear of the handset to access the battery compartment.

Warning: The plate on the rear of the 4080 Handset must not be removed in a potentially explosive atmosphere.

2Insert the screwdriver into the small crack behind the blind cover and press to open the handset.

14117800, Ed.2.6

Page 74
Image 74
Polycom 14117800 manual Retrieving Serial Number on Kirk 3040 Handsets, Remove Back Cover from Handset