90Configuring KIRK Wireless Server 600v3

1Under the Configuration menu, click IP.

Figure 25 Adm. Page: Configuration/IP/Settings page

2In the TOS priority - RTP Data field, type a TOS priority.

Depending on the network, it may be necessary to change the TOS priority.

Most networks: The default TOS priority is: 0x10

If CISCO network: It is recommended to change the TOS priority - RTP Data to

0xb8

3In the TOS priority - Signalling field, type a TOS priority.

Depending on the network, it may be necessary to change the TOS priority.

Most networks: The default TOS priority is: 0x10

If CISCO network: It is recommended to change the TOS priority - Signalling to

0x68

For information about the TOS priorities used in your network, contact you system administrator.

4Click Reset (under Administration menu) to save your configuration.

7.6Configuring Multi-Cell Solution through Administration Page

Note: Using the web based Administration Page is recommended when configuring small to medium-sized installations.

This section describes how to configure a KWS600v3 Multi-cell solution.

14117800, Ed.2.6

Page 90
Image 90
Polycom 14117800 Configuring Multi-Cell Solution through Administration, Under the Configuration menu, click IP, 0xb8