Polycom 14117800 manual Activating MSF Messages Function, Adm. Page Configuration/General/Telnet

186Messaging over MSF

Confirmation of sent messages having been received is done by the recipient answering the message. It is also shown in the system as an acknowledgement of each message having reached the handset display. If a message does not receive an answer within a specified period of time (for instance 30 seconds) it is possible to preset the system to automatically send it to another relevant user.

When writing an MSF message it is possible to send it:

•An MSF message can be sent to a single handset as a Two Way Text message.

The system can handle a maximum of 26-30 messages per minute being sent simultaneously from the system to a number of handsets.

•Broadcast

•An MSF message can be sent to all handsets at the same time as a One Way Text message.

The system can handle a maximum of 26-30 messages per minute to all handsets simultaneously from the system.

11.2 Activating MSF Messages Function

This section describes how to enable the MSF messages function by activating the TELNET system.

1Under the Configuration menu, click General, and then click Telnet.

Figure 120 Adm. Page: Configuration/General/Telnet page

2Select the Enable Telnet check box.

3Click OK.

The configuration has now been changed and the TELNET system is activated, making it possible to send MSF messages.

14117800, Ed.2.6