41

Chapter 4 Installing the KIRK Wireless Server 600v3

This section provides a description of the KWS600v3 and describes how to unpack and install it. The section also provides information about resetting the KWS600v3 hardware using the Reset button on the KWS600v3 faceplate.

Before you install the equipment, ensure that a site planner defines the locations of the KWS600v3.

This section contains the following information:

“Unpacking” on page 41

Description of KIRK Wireless Server 600v3 on page 41

“Installing the KIRK Wireless Server 600v3” on page 46

“Recording the Installation Information” on page 48

4.1Unpacking

4.1.1 Inspect for Damage

1Inspect the shipping carton for evidence of physical damage or mishandling prior to opening.

2Inspect all parts for damage.

3Report any damage to the carrier immediately.

4If it is necessary to make a damage claim for the carrier, do not move the shipping carton until it has been examined by a representative of the carrier.

5Dispose of empty cartons in accordance with local regulations.

4.1.2 Unpacking the Shipping Container

For indoor installations, the following items should be present in every box containing a KWS600v3:

KIRK Wireless Server 600v3

Two mounting screws and anchors

4.2Description of KIRK Wireless Server 600v3

This section contains information about:

“KIRK Wireless Server 600v3 Provides RF Channels to KIRK Handsets” on page 42

“KIRK Wireless Server 600v3 Types and Part Numbers” on page 42

“KIRK Wireless Server 600v3 Appearance and Components” on page 42

KIRK Wireless Server 600v3 Installation and Configuration Guide

Page 41
Image 41
Polycom 14117800 Installing the Kirk Wireless Server, Unpacking, Description of Kirk Wireless Server, Inspect for Damage