Polycom 14117800 8.2.3.1 Creating Login (Subscribing Handset)

KIRK Handset Registration and Subscription 157
KIRK Wireless Server 600v3 Installation and Configuration Guide
If a handset looses signal from the system (the display showing a no signal icon), then
after 20 seconds the handset will start searching for an alternative system available
from the Login list and automatically change to this system.
Note: Using Auto Login A any call will be dropped when changing to an alternative
system.
This section provides information about:
•“Creating Login (Subscribing Handset)” on page 157
•“Subscribing a Handset to Different Systems” on page 158
Note: Subscription of handsets requires the use of each registered handset.
Note: To make subscriptions, the system must allow subscriptions to be made. Some
systems also require an Authentication Code (AC). If more than one system currently
permits subscription, you will need to know the ID of the system (ARI code) to which
you wish to subscribe. Authentication Codes and system ID’s (ARI codes) will be
provided by the system administrator.
Before subscribing handsets you need to ensure:
• that handset battery has been charged (“” on page 71). Low battery could cause subscription problems.
• that the handsets have been registered to the system (“Registering KIRK Handsets” on page 145).
8.2.3.1 Creating Login (Subscribing Handset)
To create a login, the system must allow subscriptions to be made. Some systems also
require an Authentication Code (AC). If more than one system currently permits
subscription, you will need to know the ID of the system to which you want to subscribe.
Authentication Codes and system ID’s will be provided be the system administrator.
You can subscribe up to 10 systems (create 10 logins).
1Press Menu to enter main menu.
2Scroll to Settings and press Select.
3Scroll to Advanced and press Select.
4Scroll to Login and press Select.
5Scroll to Create login and press Select. The handset will start searching for a system.
6Scroll to the found system and press Select.
7Enter an AC Code and press Ok to connect to the system.
8Press Ok.