132Configuring KIRK Wireless Server 600v3

2In the Gatekeeper area:

From the Mode list, select Standby. Selecting Standby defines the KWS600v3 as an alternative (Standby) Master.

3In the Radio field:

Select the Disable check box to disable the radio.

4Save the configuration now or wait until you have finished configuring the whole installation.

For more information about saving the configuration, refer to “Saving Configurations” on page 141.

7.8.3 Configuring LDAP Server

In a KWS600v3 Multi-cell solution it is possible to configure an LDAP Server to handle all handset/user registration data (such as name, directory number, IPEI etc.).

If you configure an LDAP Server to handle all handset/user registration and read/write information between the primaries and secondaries of a KWS600v3 Solution, then the Master KWS600v3 only manages the connection to the call handler.

Note: Configuring an LDAP Server is only recommended in very large multi-cell installations (more than 500-600 handsets).

Figure 71 Wireless Server 600v3 Multi-cell installation with LDAP Server

In the LDAP Server tab you configure the LDAP Server.

14117800, Ed.2.6

Page 132
Image 132
Polycom 14117800 manual Configuring Ldap Server, Ldap Server tab you configure the Ldap Server