Polycom 14117800 manual Adm. Page Configuration/ETH0/DHCP

106Configuring KIRK Wireless Server 600v3

1Under the Configuration menu, click ETH0, and then click DHCP.

Figure 44 Adm. Page: Configuration/ETH0/DHCP page

2From the Mode list, select Disabled, and then click OK.

3Click Reset (under Administration menu) to save your configuration.

4Under the Configuration menu, click ETH0, and then click IP.

Note: It is necessary to use the ETH0 port when integrating the KWS600v3 on the local network.

Figure 45 Adm. Page: Configuration/ETH0/IP page

5In the IP address field, type the new IP address.

The new IP address is now the default address when accessing the KWS600v3.

6In the Network mask field, type a new network mask.

7In the Default gateway field, type the IP address of the default gateway. Contact your system administrator for more information.

8Click OK.

14117800, Ed.2.6