Polycom 14117800 manual Subscribing Handsets

KIRK Handset Registration and Subscription 155

Note: To make subscriptions, the system must allow subscriptions to be made. Some systems also require an Authentication Code (AC). If more than one system currently permits subscription, you will need to know the ID of the system (ARI code) to which you wish to subscribe. Authentication Codes and system ID’s (ARI codes) will be provided by the system administrator.

Before subscribing handsets you need to ensure:

•that handset battery has been charged (“” on page 71). Low battery could cause subscription problems.

•that the handsets have been registered to the system (“Registering KIRK Handsets” on page 145).

8.2.2.1 Subscribing Handsets

1Press MENU - go to MENU LOGIN.

2Press 3 - go to SUBSCRIPTION CREATE to subscribe to a system.

3Press 3. The handset searches for the serial number of the system.

4Use the < > keys to scroll between the IDs systems if there is more than one system available.

During subscription, the handset searches for free positions and performs subscription on the first free position.

5As soon as the correct serial number of the system appears in the display, press 3. The serial number is located on the label on the rear of the KWS600v3.

6Enter the AC (if required) using the keyboard, and press 3.

An antenna symbol appears on the display to indicate a successful subscription. If not, the subscription has failed and the procedure must be retried.

8.2.2.2 Subscribing a Handset to Different Systems

The handset can be subscribed (connected) to a maximum of 10 different systems.

Note: To be able to log on to a system, subscription to the system must be established.

8.2.2.2.1 Changing to another System Automatically Using Auto Login A

Note: Auto Login A should only be used when systems are separate, with no overlaps.

1Press MENU - go to MENU LOGIN.

2Press 3 - go to SELECT LOGIN.

KIRK Wireless Server 600v3 Installation and Configuration Guide