96Configuring KIRK Wireless Server 600v3

3In the Password fields, type the passwords.

4Select the Write Access check box.

5Click OK.

6Click Reset (under Administration menu) to save your configuration.

7.6.1.6 Configuring DECT System (Primary)

1Under the Configuration menu, click DECT, and then click System.

Figure 33 Adm. Page: Configuration/DECT/System page

2In the Name field, the name MUST ALWAYS be DECT. If changing the name, the system cannot operate.

3In the PWD (password) field, type the password, and then type it again in the field below.

4In the Sys-Maskfield, when having repeaters on the system, you must type either:

0x3f (up to 64)

Repeaters with higher radio ID than 64 with offset 64 will perform bearer handover.

0x7f (up to128)

Repeaters with higher radio ID than 128 with offset 64 will perform bearer handover.

0xff (up to 256)

Repeaters connected will only perform connection handover.

5From the Subscriptions list, select either With User AC, With system AC or Disable.

14117800, Ed.2.6

Page 96
Image 96
Polycom 14117800 manual Configuring Dect System Primary, 0x7f up to128, 0xff up to