Polycom 14117800 manual Reading Dect Statistics

System Management 167

•Time; time information - if a time server is valid

•Uptime; information about uptime since last restart

•Firmware (only displayed if radio is active)

•System ARI; ARI code of the system (only displayed if radio is active)

•Frequency

10.1.3 Reading DECT Statistics

In the DECT menu, under Administration, it is possible to read information about calls, users, radio calls, and handovers in the system. You get an over all overview of how the system is running.

Note: The pages in the DECT menu varies, depending on the installation (single-cell/ multi-cell) and role of the KWS600v3 (Master/Secondary/LDAP Server).

This section provides information about:

•“Statistics” on page 167

•“Users” on page 168

•“Unknown” on page 168

•“Radios” on page 169

•“” on page 169

•“” on page 170

•“Handovers” on page 171

10.1.3.1 Statistics

This page is useful to get statistic information from the KWS600v3 about all the incoming and outgoing calls on the system and handover information.

1Under the Administration menu, click DECT.

Figure 98 Adm. Page: Administration/DECT/Statistics page

KIRK Wireless Server 600v3 Installation and Configuration Guide