Installing the KIRK Repeater 55

Note For programming the repeater you also need the programming software (ServiceTool) and the power supply for the repeater. The ServiceTool is not part of the Programming Kit Repeater but can be downloaded from www.polycom.com. The power supply for the repeater is to be ordered separately (Part no. UK version: 84642421, Part no. EU version:

84642420, Part no. US version: 84642432).

Figure 5-4Programming Kit Repeater

Splitter

Serial cable

5.4.2 Set up of the Hardware for Repeater Programming

1Unplug the repeater power supply and insert the splitter.

2Connect the repeater power supply to the splitter and the mains. LED flashes.

Note: Ensure that you have the appropriate power supply for the local requirements.

3Connect the serial cable to the splitter and Com port of your computer. The repeater is now ready for programming via the ServiceTool.

Note: The above mentioned order of the set up (point 1, 2 and 3) is important.

5.4.3 Programming the KIRK Repeater with the ServiceTool

The ServiceTool is the tool you access from your desktop and use for repeater programming, handset adjustment and software download to the handset and repeater.

The ServiceTool identifies the type of repeater, and with this software it is possible to program the KIRK Repeater to connect to the KIRK DECT Radio Infrastructure solutions.

KIRK Wireless Server 600v3 Installation and Configuration Guide

Page 55
Image 55
Polycom 14117800 manual Set up of the Hardware for Repeater Programming, Programming the Kirk Repeater with the ServiceTool