Polycom 14117800 manual Kirk Handsets Environmental Requirements

Introduction 29

2.2.2.2 Electrical Requirements

The following electrical requirements must be met:

•The max. radiated output power for the antenna is 10mW e.i.r.p/channel.

•The supplied power for the charger must be 110 V to 120 V ac nominal (or 220 V to 230 V ac nominal), 50/60 Hz.

2.2.3 KIRK Handsets

2.2.3.1 Environmental Requirements

•The area where the handset is used must be within the temperature ranges of 0°C and 40°C.

•For correct battery charging, the room temperature must be between 0°C and 25°C/ 32°F and 77°F. Therefore, the handset must not be placed in direct sunlight. The battery has a built-in heat sensor which will stop charging if the battery temperature is too high.

•For battery information, refer to “” on page 67.

•The area where the handset is used must be between 20% and 80% non-condensing relative humidity.

KIRK Wireless Server 600v3 Installation and Configuration Guide