Polycom 14117800 manual Gatekeeper area From the Mode list, select Active

Configuring KIRK Wireless Server 600v3 125

2In the Gatekeeper area:

•From the Mode list, select Active.

•In the Gatekeeper field, type the IP address of your call handler. Contact your system administrator for more information.

•In the Alternative Gatekeeper field, type an alternative IP address of your call handler (optional).

Contact your system administrator for more information.

•From the Protocol list, select either H323, SIP or Skinny depending on the protocol you are using.

3In the System area:

•In the AC field, type an authentication code (optional).

•From the Subscriptions list, select either Allow Anonymous, With User AC only, or Disabled.

Note: It is recommended to select With User AC only. When subscribing a new handset to the system it is possible to use an authentication code (AC). If you want to use the authentication code, you must select With User AC only. For more information about subscription of handsets and authentication codes, refer to “Subscribing Handsets” on page 152.

•From the Coder list, select a voice compression value that matches your telephony infrastructure.

Contact your system administrator for more information.

Note: The voice compression value is not exclusive and the KWS600v3 is not forced to use the coder.

•From the Tones list, select a ring tone.

4In the Radio area:

•In the Radio-Idfield, type 1.

5Save the configuration.

For more information about saving the configuration, refer to “Saving Configurations” on page 141.

7.8Configuring Multi-Cell Solution through KIRK Configuration Tool

Note: Using the Configuration Tool is recommended when configuring medium-sized to large installations.

Note: Multi cell license must be installed on the master KIRK Wireless Server 600v3

For information on accessing the Configuration Tool, refer to “Accessing the KIRK Configuration Tool” on page 81.

KIRK Wireless Server 600v3 Installation and Configuration Guide