Polycom 14117800 manual Kirk Repeater Appearance and Components, Kirk Repeater LED Indicators

Installing the KIRK Repeater 51

5.1.3 KIRK Repeater - Appearance and Components

The repeater connection panel includes the following:

•Power supply connection (connection for programming the repeater as well).

Note: The power supply for the repeater is to be ordered separately (Part no. UK version: 84642421,

Part no. EU version: 84642420, Part no. US version: 84642432).

•Antenna connector for repeaters supplied with external antenna connection.

Note: The external antenna incl. antenna cable is to be ordered separately (part no. 02319505).

•LED that indicates whether or not the unit is functioning.

Figure 5-1 Repeater

LED

5.1.4 KIRK Repeater LED Indicators

The repeater has one LED indicator describing the repeater operations. The indicator is off when the repeater is not powered. The LED flashes when the repeater initializes, and it is on when the repeater is in sync. The LED flashes each time a connected handset is off or on hook or makes handover from or to a repeater.

5.1.5 Installing the KIRK Repeater

Before beginning the installation, determine the position of the repeater for best coverage. The coverage depends on the construction of the building, architecture, and the choice of building materials.

5.1.5.1 Environmental requirements

•Avoid installing repeaters on large concrete or marble columns because these columns affect radio coverage. If possible, place the base station a minimum of one meter/3.3 feet from these types of columns.

KIRK Wireless Server 600v3 Installation and Configuration Guide