Preparing KIRK Handset for Use 75

Figure 10 Remove Back Cover from Handset with Screw Fastener

3Lift the battery and read the serial number.

4Replace battery and back cover.

Note: To show the serial number on the handset display, press *99984*, and then press 3; the serial number appears on the handset display. Press < for 5 seconds to exit the menu.

6.6.3 Retrieving Serial Number on KIRK 5020 / 5040 Handsets

1Press down the back cover and slide it towards the bottom of the handset.

Figure 11 Remove Back Cover from Handset

2Lift off back cover.

3Lift the battery and read the serial number.

4Replace battery and back cover.

Note: To show the serial number on the handset display (5020 / 5040 Handset), press Menu, select Status and then select Firmware version. Press exit to exit the menu.

KIRK Wireless Server 600v3 Installation and Configuration Guide

Page 75
Image 75
Polycom 14117800 Retrieving Serial Number on Kirk 5020 / 5040 Handsets, Remove Back Cover from Handset with Screw Fastener