Polycom 14117800 manual Configuring Dect System, From the Tones list, select a ring tone

Configuring KIRK Wireless Server 600v3 87

7.5.4 Configuring DECT System

1Under the Configuration menu, click DECT, and then click System.

Figure 22 Adm. Page: Configuration/DECT/System page

2In the Name field, the name MUST ALWAYS be DECT. If changing the name, the system cannot operate.

3In the PWD (password) field, type the password, and then type it again in the field below.

4From the Subscriptions list, select either With User AC, With System ACor Disable.

Note: It is recommended to select With User AC. When subscribing a new handset to the system it is possible to use an authentication code (AC). If you want to use the authentication code, you must select With User AC. For more information about subscription of handsets and authentication codes, refer to “Subscribing Handsets” on page 152

5From the Tones list, select a ring tone.

6Enbloc Dialing check box:

Call handler specific, refer to KWS600v3 Configuration Guide for the relevant call handler.

7Local R-Key/Display Handling check box:

Call handler specific, refer to KWS600v3 Configuration Guide for the relevant call handler.

8DTMF through RTP channel check box:

KIRK Wireless Server 600v3 Installation and Configuration Guide