Polycom 14117800 manual Faceplate, Kirk Wireless Server 600v3 Reset Button

	Installing the KIRK Wireless Server 600v3 45
Table 2 LED Indicator Description - Front Cover
Fast green flashing	empty system
(light appears orange because of
the steady red)
Slow green flashing	in operation with one or more active connections
(light appears orange because of
the steady red)
Slow red flashing	in operation with the maximum active connections (busy)
Fast red flashing	Out of sync.

4.2.4.2 Faceplate

LED Indicator Description - Faceplate

LED Indicator	Meaning
LINK Indicator - yellow	link layer software has established connection
100 Indicator - green	line speed is 100Mbit/sec.
Alarm Indicator - red	KWS600v3 software is in error mode
Ready Indicator - green	KWS600v3 software is up running in normal mode
Power Indicator - yellow	KWS600v3 is connected to Power

4.2.5 KIRK Wireless Server 600v3 - Reset Button

It is possible to restart or reset the KWS600v3 by pressing the Reset button on the faceplate of the KWS600v3. For description of the faceplate, refer to “Faceplate” on page 45.

4.2.5.1 Resetting the KIRK Wireless Server 600v3 Hardware

This section contains description of the different actions that take place when pressing the Reset button.

KIRK Wireless Server 600v3 Installation and Configuration Guide