Polycom 14117800 manual Configuring Dect Radio Secondary, Adm. Page Configuration/DECT/Radio

116Configuring KIRK Wireless Server 600v3

7.6.4.7 Configuring DECT Radio (Secondary)

On the Radio page you define which radio ID the Master KWS600v3 and Sync Master has to synchronize with.

1Under the Configuration menu, click DECT, and then click Radio.

Figure 57 Adm. Page: Configuration/DECT/Radio page

2In the Master field, type the IP address of the Master KWS600v3.

3In the Radio-Idfield, type the radio ID number of the KWS600v3. The radio ID can be a number between 1 and 255. See your site planner.

Note: It is advisable to make the IP address numbering of a Secondary KWS600v3 identical with the radio ID number of the unit in question, eg.:

•IP address 192.168.1.3/Radio ID 3

•IP address 192.168.1.4/Radio ID 4

•IP address 192.168.1.5/Radio ID 5

4In the Sync-Sourcefield, type the radio ID of the KWS600v3, you want to synchronize on. See your site planner.

5In the Alt-Sync-Sourcefield, type the radio ID of the KWS600v3, you want to synchronize on. See your site planner.

6Click OK.

7Click Reset (under Administration menu) to save your configuration. The Secondary KWS600v3 is now configured.

Note: When configuring more KWS600v3 secondaries, it is possible to make a backup of the configuration file of the first configured Secondary KWS600v3. This configuration file can be used as input to configure the rest of the KWS600v3 secondaries. For more information about making a backup of a configuration file, refer to “Updating Configuration File” on page 178. For more information about configuring KWS600v3 secondaries using a backup configuration file of another Secondary KWS600v3 as input, refer to “” on page 117.

14117800, Ed.2.6