Polycom 14117800 manual Obtaining a Multi-Cell License Primary

94Configuring KIRK Wireless Server 600v3

9Click Reset (under Administration menu) to save your configuration.

7.6.1.3 Obtaining a Multi-Cell License (Primary)

To configure a KWS600v3 Multi-cell solution it is necessary to obtain a multi-cell license. (E-mail MAC address to emeadkordermanagement@polycom.com, and you will obtain the license)

1Under the Configuration menu, click General, and then copy the serial number of the KWS600v3 from the Info page.

2E-mail MAC address to emeadkordermanagement@polycom.com and require a multi-cell license for the KWS600v3.

Note: Remember to write/paste the MAC address of the KWS600v3 in the e-mail.

3You will now receive an e-mail containing a text file with the multi-cell license. Save this file. The text file is to be uploaded to the system.

4Under the Configuration menu, click General, and then click License.

Figure 30 Adm. Page: Configuration/General/License page

5Click Browse to search for the text file containing license information, select it, and then click Open.

6Click Upload to upload the file.

7Click either Reset Immediately or Idle Reset.

When resetting the KWS600v3 immediately, all calls are terminated and the KWS600v3 is reset. When resetting the KWS600v3 when the system is idle, the reset is done when there are no active calls in the KWS600v3.

8Click the License menu again to check that the file has been uploaded.

14117800, Ed.2.6