Furuno GP-1650WDF, GP-1650WF Loading Data from Memory Card, 10-3, Error messages, Data overwrite

Error messages

Memory card not inserted

Press the [ENTER] key to return to the SAVE DATA display.

MEMORY CARD NOT

INSERTED. INSERT CARD

PRESS "ENTER" key

TO CONTINUE.

Not inserted message

Unformatted memory card

Press the [ENTER] key to return to the SAVE DATA display. And format it refering to the previous page.

MEMORY CARD NOT

FORMATTED

PRESS "ENTER" key

TO CONTINUE.

Not formatted message

Wrong card inserted

When a wrong card is inserted, the following error message appears. Press the [ENTER] key to return to the SAVE DATA display.

Replace it with a formatted memory card.

WRONG CARD INSERTED.

INSERT MEMORY CARD.

PRESS "ENTER" key

TO CONTINUE.

Wrong card message

Data overwrite

Data type to be recorded exists on memory card. (Two or more of same data type cannot be recorded.) Press the [ENTER] key to overwrite same data type on the card, or press the [CLEAR] key to escape.

OVERWRITE FOLLOWING

DATA. OK? (TRACK)

YES ... "ENTER" key NO ... "CLEAR" key

Overwrite message

10.MEMORY CARD OPERATIONS

10.3Loading Data from Memory Card

Data (track, marks, waypoints, configuration) can be loaded from a memory card and displayed on the screen. This feature is useful for observing past data and setting up the equipment for a specific purpose (with “configuration”).

1.Press the [MENU] key followed by the soft keys CONFIGURATION and

UPLOAD/DOWNLOAD DATA.

2.Press the LOAD DATA FROM MEMORY CARD soft key to show the LOAD DATA display.

		LOAD
	OFF
TRACK		DATA

MARK/LINE OFF EDIT

WAYPOINT/ROUTE	OFF	LOAD
		DATA
CONFIGURATION	OFF

	RETURN
DGPS 3D

Load data display

3.Press ▲ or ▼ to select item to load.

4.Press the EDIT soft key to show the ON/OFF selection window.

5.Press ▲ to select ON. Press the ENTER soft key or the [ENTER] key. If the memory card does not contain the item selected, the buzzer sounds and ON cannot be selected.

6.After you select all items desired, press the LOAD DATA soft key to load data. The following message appears.

10-3